Attributes | Values |
---|
rdf:type
| |
Description
| - The aim of this research paper is to design two variants of cooling systems (cavities) for an injection mold. Both systems are designed to be used on the same injection mold for producing the same product. The difference is in the manufacturing technology itself. The first variant was made by conventional methods of machining and the second variant was made by combination of conventional methods and unconventional rapid prototyping technology Direct Metal Laser Sintering (DMLS). It was dealt with design of the universal injection mold frame and both cooling systems for an existing product in the first part of this research paper. In the second part were both designs compared by mechanical analysis and their influence on final product by flow analysis. Last part is focused on economical evaluation of both designs. .
- The aim of this research paper is to design two variants of cooling systems (cavities) for an injection mold. Both systems are designed to be used on the same injection mold for producing the same product. The difference is in the manufacturing technology itself. The first variant was made by conventional methods of machining and the second variant was made by combination of conventional methods and unconventional rapid prototyping technology Direct Metal Laser Sintering (DMLS). It was dealt with design of the universal injection mold frame and both cooling systems for an existing product in the first part of this research paper. In the second part were both designs compared by mechanical analysis and their influence on final product by flow analysis. Last part is focused on economical evaluation of both designs. . (en)
|
Title
| - Utilization of Direct Metal Laser Sintering in Injection Mold Design
- Utilization of Direct Metal Laser Sintering in Injection Mold Design (en)
|
skos:prefLabel
| - Utilization of Direct Metal Laser Sintering in Injection Mold Design
- Utilization of Direct Metal Laser Sintering in Injection Mold Design (en)
|
skos:notation
| - RIV/70883521:28110/12:43869120!RIV13-MSM-28110___
|
http://linked.open...avai/predkladatel
| |
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/70883521:28110/12:43869120
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - Rapid Prototyping, Direct Metal Laser Sintering, Injection Molding, Analysis, Mold, Part (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...v/mistoKonaniAkce
| |
http://linked.open...i/riv/mistoVydani
| |
http://linked.open...i/riv/nazevZdroje
| - Recent Researches in Circuits and Systems
|
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...vavai/riv/projekt
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...iv/tvurceVysledku
| - Maňas, David
- Maňas, Miroslav
- Navrátil, Jan
- Staněk, Michal
- Šanda, Štěpán
- Bednařík, Martin
- Mizera, Aleš
|
http://linked.open...vavai/riv/typAkce
| |
http://linked.open.../riv/zahajeniAkce
| |
issn
| |
number of pages
| |
http://purl.org/ne...btex#hasPublisher
| |
https://schema.org/isbn
| |
http://localhost/t...ganizacniJednotka
| |
is http://linked.open...avai/riv/vysledek
of | |