Attributes | Values |
---|
rdf:type
| |
Description
| - Separation of particular material components of highly filled polymer based composites during highshear technologies as injection molding is often the factor limiting quality of the final products. This is even more severe for parts produced via powder injection molding (PIM), where a polymeric component is termally or chemically extracted after injection molding, and remaining porous structure is sintered so as to obtain purely metal or ceramic item. A considerable portion of final parts do not meet the quality requirements due to the unacceptable surface quality resulting from the separation of feedstock components. The aim of the research is to evaluate the resulting surface of the parts with a contactless approach, which allows the quantification of the surface defects found. Then, the tendency to separation as a function of material composition and/or processing parameters is considered to provide a tool for the simulation of the processing route.
- Separation of particular material components of highly filled polymer based composites during highshear technologies as injection molding is often the factor limiting quality of the final products. This is even more severe for parts produced via powder injection molding (PIM), where a polymeric component is termally or chemically extracted after injection molding, and remaining porous structure is sintered so as to obtain purely metal or ceramic item. A considerable portion of final parts do not meet the quality requirements due to the unacceptable surface quality resulting from the separation of feedstock components. The aim of the research is to evaluate the resulting surface of the parts with a contactless approach, which allows the quantification of the surface defects found. Then, the tendency to separation as a function of material composition and/or processing parameters is considered to provide a tool for the simulation of the processing route. (en)
|
Title
| - Surface Quality of Parts Produced via Powder Injection Molding
- Surface Quality of Parts Produced via Powder Injection Molding (en)
|
skos:prefLabel
| - Surface Quality of Parts Produced via Powder Injection Molding
- Surface Quality of Parts Produced via Powder Injection Molding (en)
|
skos:notation
| - RIV/70883521:28110/12:43868077!RIV13-MSM-28110___
|
http://linked.open...avai/predkladatel
| |
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| - P(ED2.1.00/03.0111), P(GA103/08/1307)
|
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/70883521:28110/12:43868077
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - surface properties, injection molding, polymer, filler (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...v/mistoKonaniAkce
| |
http://linked.open...i/riv/mistoVydani
| |
http://linked.open...i/riv/nazevZdroje
| - Recent Researchers in Environmental and Geological Scientist (EE´12, CM´12,WHH´12, GES´12)
|
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...vavai/riv/projekt
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...iv/tvurceVysledku
| - Pata, Vladimír
- Hausnerová, Berenika
|
http://linked.open...vavai/riv/typAkce
| |
http://linked.open.../riv/zahajeniAkce
| |
issn
| |
number of pages
| |
http://purl.org/ne...btex#hasPublisher
| |
https://schema.org/isbn
| |
http://localhost/t...ganizacniJednotka
| |
is http://linked.open...avai/riv/vysledek
of | |