Attributes | Values |
---|
rdf:type
| |
Description
| - Mechanické a tribologické vlastnosti naprašovaných MoSeC povlaků testovaných za vyšších teplot. (cs)
- Mo Se C films were deposited by sputtering from a C target with pellets of MoSe2. Besides the evaluation of the chemical composition, the structure, the morphology, the hardness and the cohesion/adhesion, special attention was paid to the tribological characterization. The C content varied from 29 to 68 at.% which led to a progressive increase of the Se/Mo ratio. As a typical trend, the hardness increases with increasing C content. The coatings were tested at room temperature with different air humidity levels and at temperatures up to 500 oC on a pin-on-disc tribometer. The friction coefficient of Mo-Se-C coatings increased with air humidity from ~0.04 to ~0.12, while it was as low as 0.02 at temperature range 100-250 oC. The coatings were very sensitive to the elevated temperature being worn out at 300 oC due to adhesion problems at coating - titanium interface.
- Mo Se C films were deposited by sputtering from a C target with pellets of MoSe2. Besides the evaluation of the chemical composition, the structure, the morphology, the hardness and the cohesion/adhesion, special attention was paid to the tribological characterization. The C content varied from 29 to 68 at.% which led to a progressive increase of the Se/Mo ratio. As a typical trend, the hardness increases with increasing C content. The coatings were tested at room temperature with different air humidity levels and at temperatures up to 500 oC on a pin-on-disc tribometer. The friction coefficient of Mo-Se-C coatings increased with air humidity from ~0.04 to ~0.12, while it was as low as 0.02 at temperature range 100-250 oC. The coatings were very sensitive to the elevated temperature being worn out at 300 oC due to adhesion problems at coating - titanium interface. (en)
|
Title
| - Mechanical and Tribological Properties of Sputtered Mo-Se-C Coatings
- Mechanické a tribologické vlastnosti naprašovaných MoSeC povlaků. (cs)
- Mechanical and Tribological Properties of Sputtered Mo-Se-C Coatings (en)
|
skos:prefLabel
| - Mechanical and Tribological Properties of Sputtered Mo-Se-C Coatings
- Mechanické a tribologické vlastnosti naprašovaných MoSeC povlaků. (cs)
- Mechanical and Tribological Properties of Sputtered Mo-Se-C Coatings (en)
|
skos:notation
| - RIV/68407700:21260/07:06139545!RIV08-GA0-21260___
|
http://linked.open.../vavai/riv/strany
| |
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/68407700:21260/07:06139545
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - MoSeC; elevated temperature; self-lubricant; tribology (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...v/mistoKonaniAkce
| |
http://linked.open...i/riv/mistoVydani
| |
http://linked.open...i/riv/nazevZdroje
| |
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...vavai/riv/projekt
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...iv/tvurceVysledku
| - Cavaleiro, A.
- Evaristo, M.
- Polcar, Tomáš
- Stueber, M.
|
http://linked.open...vavai/riv/typAkce
| |
http://linked.open.../riv/zahajeniAkce
| |
number of pages
| |
http://purl.org/ne...btex#hasPublisher
| - Slovenian Society for Tribology
|
https://schema.org/isbn
| |
http://localhost/t...ganizacniJednotka
| |
is http://linked.open...avai/riv/vysledek
of | |