Attributes | Values |
---|
rdf:type
| |
Description
| - In this paper the creep behaviour of two model cast Ni-Cr-W-C alloys (Alloys A and B) resistant to high-temperature oxidation with different contents of Cr, W, Zr and Fe was investigated. Uniaxial tensile creep tests were carried out at temperatures from 1023 to 1273 K and at the applied tensile stresses ranged from 20 to 250 MPa. Creep tests were followed by microstructural investigations by means of both transmission and scanning electron microscopy. A comparison between the creep characteristics of these model alloys under comparable creep loading conditions shows that the alloy B with higher content of tungsten and zirconium is more creep resistant as that of the Alloy A at lower temperatures. Possible reason for the different consequence of strengthening effects is discussed. However, the creep-rate controlling dislocation mechanism is most probably the same in both alloys.
- In this paper the creep behaviour of two model cast Ni-Cr-W-C alloys (Alloys A and B) resistant to high-temperature oxidation with different contents of Cr, W, Zr and Fe was investigated. Uniaxial tensile creep tests were carried out at temperatures from 1023 to 1273 K and at the applied tensile stresses ranged from 20 to 250 MPa. Creep tests were followed by microstructural investigations by means of both transmission and scanning electron microscopy. A comparison between the creep characteristics of these model alloys under comparable creep loading conditions shows that the alloy B with higher content of tungsten and zirconium is more creep resistant as that of the Alloy A at lower temperatures. Possible reason for the different consequence of strengthening effects is discussed. However, the creep-rate controlling dislocation mechanism is most probably the same in both alloys. (en)
|
Title
| - The Creep Characteristics of Model cast Ni-Cr-W-C alloys
- The Creep Characteristics of Model cast Ni-Cr-W-C alloys (en)
|
skos:prefLabel
| - The Creep Characteristics of Model cast Ni-Cr-W-C alloys
- The Creep Characteristics of Model cast Ni-Cr-W-C alloys (en)
|
skos:notation
| - RIV/68081723:_____/12:00386289!RIV13-AV0-68081723
|
http://linked.open...avai/predkladatel
| |
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/68081723:_____/12:00386289
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - cast based superalloy; precipitation hardening; phase stability (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...v/mistoKonaniAkce
| |
http://linked.open...i/riv/mistoVydani
| |
http://linked.open...i/riv/nazevZdroje
| - Creep and Fracture of Engineering Materials and Structure
|
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...iv/tvurceVysledku
| - Hrbáček, K.
- Kuchařová, Květa
- Kvapilová, Marie
- Sklenička, Václav
- Svoboda, Milan
|
http://linked.open...vavai/riv/typAkce
| |
http://linked.open.../riv/zahajeniAkce
| |
http://linked.open...n/vavai/riv/zamer
| |
number of pages
| |
http://purl.org/ne...btex#hasPublisher
| - The Japan Institute of Metals
|
https://schema.org/isbn
| |
is http://linked.open...avai/riv/vysledek
of | |