Attributes | Values |
---|
rdf:type
| |
Description
| - The paper summarizes results of research work aimed at the determination of shape stability, modulus of rupture (MOR) and modulus of elasticity (MOE) of components manufactured of particle boards, which were veneered from their tight side by the decorative veneer of American walnut (Juglans nigra) 0.6 mm thick and on the underside by decorative veneers of different species (Picea abies and Fagus sylvatica 0.6--1.5 mm in thickness or by a countermove foil of 85--90 g/m2 surface weight. Subsequently, measurements were carried out of the shape stability (warping) of test specimens cut from various combinations of surface-finished boards. These test specimens were air conditioned in three different environments. At the same time, values were determined of bending strength and modulus of rupture with respect to the direction of fibres of sheathing materials. It has been found that the lowest values of warping were achieved at material combinations consisting of American walnut of a thickness of 0.6 mm on the tight side and alder (Alnus glutinosa) 0.6 mm in thickness on the underside.
- The paper summarizes results of research work aimed at the determination of shape stability, modulus of rupture (MOR) and modulus of elasticity (MOE) of components manufactured of particle boards, which were veneered from their tight side by the decorative veneer of American walnut (Juglans nigra) 0.6 mm thick and on the underside by decorative veneers of different species (Picea abies and Fagus sylvatica 0.6--1.5 mm in thickness or by a countermove foil of 85--90 g/m2 surface weight. Subsequently, measurements were carried out of the shape stability (warping) of test specimens cut from various combinations of surface-finished boards. These test specimens were air conditioned in three different environments. At the same time, values were determined of bending strength and modulus of rupture with respect to the direction of fibres of sheathing materials. It has been found that the lowest values of warping were achieved at material combinations consisting of American walnut of a thickness of 0.6 mm on the tight side and alder (Alnus glutinosa) 0.6 mm in thickness on the underside. (en)
|
Title
| - Shape Stability of Particleboards Covered with Decorative Veneers
- Shape Stability of Particleboards Covered with Decorative Veneers (en)
|
skos:prefLabel
| - Shape Stability of Particleboards Covered with Decorative Veneers
- Shape Stability of Particleboards Covered with Decorative Veneers (en)
|
skos:notation
| - RIV/62156489:43410/13:00208333!RIV14-MSM-43410___
|
http://linked.open...avai/predkladatel
| |
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| |
http://linked.open...iv/cisloPeriodika
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/62156489:43410/13:00208333
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - veneerig; shape stability; warping; veneer; panel (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...odStatuVydavatele
| - HR - Chorvatská republika
|
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...i/riv/nazevZdroje
| |
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...vavai/riv/projekt
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...v/svazekPeriodika
| |
http://linked.open...iv/tvurceVysledku
| - Hrázský, Jaroslav
- Král, Pavel
- Hamšík, Petr
- Hrapková, Lenka
|
http://linked.open...ain/vavai/riv/wos
| |
issn
| |
number of pages
| |
http://bibframe.org/vocab/doi
| |
http://localhost/t...ganizacniJednotka
| |