About: Estimation of wood properties using pin pushing in method with various shapes of the penetration pin     Goto   Sponge   NotDistinct   Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

AttributesValues
rdf:type
Description
  • The existing penetration methods for the identification of the density of wood that forms a part of structures do not make it possible to describe the density in the entire element profile but only on its surface. However, wood density changes throughout the profile which affects the accuracy of the density determination. The instruments used until now based on the principle of a pin shot into the material thus needed to be supplemented with a test during which the pin would be pushed at least to the centre of the measured element. Pins of 3 mm in diameter were manufactured with a special jig fastening them to a universal testing machine. Using the testing machine, the force required to push the pin in was measured at a constant travel speed. It has been found out that the mechanical work needed for the pin penetration correlates very well with the wood density determined in the surroundings of the place where the pin was pushed in. (en)
  • Dosavadní penetrační metody určené ke zjišťování hustoty zabudovaného dřeva ve stavbách neumožňují popisovat hustotu v celém profilu prvku, ale pouze na jeho povrchu. Hustota dřeva se ovšem v profilu mění, což ovlivňuje přesnost stanovení hustoty. Doposud používané přístroje na principu vystřelování trnu proti materiálu bylo proto potřeba doplnit o zkoušku při které bude trn zatlačován minimálně do středu měřeného prvku. Byly vyrobeny hroty o průměru 3 mm se speciálním přípravkem pro upnutí na univerzální zkušební stroj. Pomocí zkušebního stroje byla měřena síla potřebná pro zatlačení hrotu při konstantní posuvné rychlosti. Bylo zjištěno, že mechanická práce potřebná pro zaražení trnu velmi dobře koreluje se stanovenou hustotou dřeva v okolí zatlačení trnu.
  • Dosavadní penetrační metody určené ke zjišťování hustoty zabudovaného dřeva ve stavbách neumožňují popisovat hustotu v celém profilu prvku, ale pouze na jeho povrchu. Hustota dřeva se ovšem v profilu mění, což ovlivňuje přesnost stanovení hustoty. Doposud používané přístroje na principu vystřelování trnu proti materiálu bylo proto potřeba doplnit o zkoušku při které bude trn zatlačován minimálně do středu měřeného prvku. Byly vyrobeny hroty o průměru 3 mm se speciálním přípravkem pro upnutí na univerzální zkušební stroj. Pomocí zkušebního stroje byla měřena síla potřebná pro zatlačení hrotu při konstantní posuvné rychlosti. Bylo zjištěno, že mechanická práce potřebná pro zaražení trnu velmi dobře koreluje se stanovenou hustotou dřeva v okolí zatlačení trnu. (cs)
Title
  • Estimation of wood properties using pin pushing in method with various shapes of the penetration pin
  • Estimation of wood properties using pin pushing in method with various shapes of the penetration pin (en)
  • Estimation of wood properties using pin pushing in method with various shapes of the penetration pin (cs)
skos:prefLabel
  • Estimation of wood properties using pin pushing in method with various shapes of the penetration pin
  • Estimation of wood properties using pin pushing in method with various shapes of the penetration pin (en)
  • Estimation of wood properties using pin pushing in method with various shapes of the penetration pin (cs)
skos:notation
  • RIV/62156489:43410/09:00139900!RIV11-MSM-43410___
http://linked.open...avai/riv/aktivita
http://linked.open...avai/riv/aktivity
  • Z(MSM6215648902)
http://linked.open...iv/cisloPeriodika
  • LVII
http://linked.open...vai/riv/dodaniDat
http://linked.open...aciTvurceVysledku
http://linked.open.../riv/druhVysledku
http://linked.open...iv/duvernostUdaju
http://linked.open...titaPredkladatele
http://linked.open...dnocenehoVysledku
  • 313600
http://linked.open...ai/riv/idVysledku
  • RIV/62156489:43410/09:00139900
http://linked.open...riv/jazykVysledku
http://linked.open.../riv/klicovaSlova
  • wood density; penetration method; diagnostic instruments; wooden structures (en)
http://linked.open.../riv/klicoveSlovo
http://linked.open...odStatuVydavatele
  • CZ - Česká republika
http://linked.open...ontrolniKodProRIV
  • [C3EC7B6F718D]
http://linked.open...i/riv/nazevZdroje
  • Acta Universitatis agriculturae et silviculturae Mendelianae Brunensis : Acta of Mendel University of agriculture and forestry Brno = Acta Mendelovy zemědělské a lesnické univerzity v Brně
http://linked.open...in/vavai/riv/obor
http://linked.open...ichTvurcuVysledku
http://linked.open...cetTvurcuVysledku
http://linked.open...UplatneniVysledku
http://linked.open...v/svazekPeriodika
  • 2/2009
http://linked.open...iv/tvurceVysledku
  • Kloiber, Michal
  • Tippner, Jan
  • Kotlínová, Mária
http://linked.open...n/vavai/riv/zamer
issn
  • 1211-8516
number of pages
http://localhost/t...ganizacniJednotka
  • 43410
is http://linked.open...avai/riv/vysledek of
Faceted Search & Find service v1.16.116 as of Feb 22 2024


Alternative Linked Data Documents: ODE     Content Formats:   [cxml] [csv]     RDF   [text] [turtle] [ld+json] [rdf+json] [rdf+xml]     ODATA   [atom+xml] [odata+json]     Microdata   [microdata+json] [html]    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3239 as of Feb 22 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 90 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software