About: K-CARBIDES PRECIPITATION IN TWO HIGH MANGANESE ALLOYS     Goto   Sponge   NotDistinct   Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

AttributesValues
rdf:type
Description
  • Two high Mn alloys marked A (24Mn-1.2C-12Al) and B (28Mn-0.7C-8.6Al) were laboratory hot rolled. After rolling in material A coarser k-carbides were detected, sporadically on the austenite grains boundaries and more frequently on the ferrite ones. Reason was un-balanced Mn a C contents in superposition with the rolling deformations and finishing rolling temperature of 950°C. Hardness corresponded to 432HV30 on average. Using light microscope no carbides on grains boundaries were observed in B both after rolling and followed aging at 500°C/6´. After 6 minutes of aging the hardness of B was approx. by 9 % higher unlike the rolled state. The X-ray analysis nucleation of nano-size k-carbides confirmed. After aging of B at 500°C/30´ and/or 60´some coarser k-carbides were detected on ferrite-austenite boundaries and/or austenite-austenite interface. The hardness went up and corresponded to 343 and/or 350HV30. From the X-ray and microstructure analyses follows the 30´ and/or 60´ dwell supported both very fine and coarser k-carbides precipitation. The calculated stacking fault energies (SFE) of both materials complete all solution. The A showed by 9 mJ.m-2 higher SFE than the B. In the A alloy lower Mn content and higher Al one resulted to 2.8 times higher ferrite volume fraction in comparison with the B alloy
  • Two high Mn alloys marked A (24Mn-1.2C-12Al) and B (28Mn-0.7C-8.6Al) were laboratory hot rolled. After rolling in material A coarser k-carbides were detected, sporadically on the austenite grains boundaries and more frequently on the ferrite ones. Reason was un-balanced Mn a C contents in superposition with the rolling deformations and finishing rolling temperature of 950°C. Hardness corresponded to 432HV30 on average. Using light microscope no carbides on grains boundaries were observed in B both after rolling and followed aging at 500°C/6´. After 6 minutes of aging the hardness of B was approx. by 9 % higher unlike the rolled state. The X-ray analysis nucleation of nano-size k-carbides confirmed. After aging of B at 500°C/30´ and/or 60´some coarser k-carbides were detected on ferrite-austenite boundaries and/or austenite-austenite interface. The hardness went up and corresponded to 343 and/or 350HV30. From the X-ray and microstructure analyses follows the 30´ and/or 60´ dwell supported both very fine and coarser k-carbides precipitation. The calculated stacking fault energies (SFE) of both materials complete all solution. The A showed by 9 mJ.m-2 higher SFE than the B. In the A alloy lower Mn content and higher Al one resulted to 2.8 times higher ferrite volume fraction in comparison with the B alloy (en)
Title
  • K-CARBIDES PRECIPITATION IN TWO HIGH MANGANESE ALLOYS
  • K-CARBIDES PRECIPITATION IN TWO HIGH MANGANESE ALLOYS (en)
skos:prefLabel
  • K-CARBIDES PRECIPITATION IN TWO HIGH MANGANESE ALLOYS
  • K-CARBIDES PRECIPITATION IN TWO HIGH MANGANESE ALLOYS (en)
skos:notation
  • RIV/61989100:27710/11:86081112!RIV12-MSM-27710___
http://linked.open...avai/predkladatel
http://linked.open...avai/riv/aktivita
http://linked.open...avai/riv/aktivity
  • P(ED0040/01/01), Z(MSM6198910015)
http://linked.open...iv/cisloPeriodika
  • 1
http://linked.open...vai/riv/dodaniDat
http://linked.open...aciTvurceVysledku
http://linked.open.../riv/druhVysledku
http://linked.open...iv/duvernostUdaju
http://linked.open...titaPredkladatele
http://linked.open...dnocenehoVysledku
  • 207275
http://linked.open...ai/riv/idVysledku
  • RIV/61989100:27710/11:86081112
http://linked.open...riv/jazykVysledku
http://linked.open.../riv/klicovaSlova
  • high manganese alloy, aging, k-carbide, hardness (en)
http://linked.open.../riv/klicoveSlovo
http://linked.open...odStatuVydavatele
  • BA - Bosna a Hercegovina
http://linked.open...ontrolniKodProRIV
  • [5EDF91A112BE]
http://linked.open...i/riv/nazevZdroje
  • Trends in the Development of Machinery and associated technology
http://linked.open...in/vavai/riv/obor
http://linked.open...ichTvurcuVysledku
http://linked.open...cetTvurcuVysledku
http://linked.open...vavai/riv/projekt
http://linked.open...UplatneniVysledku
http://linked.open...v/svazekPeriodika
  • 15
http://linked.open...iv/tvurceVysledku
  • Cagala, Michal
  • Filuš, František
  • Mazancová, Eva
  • Schindler, Ivo
http://linked.open...n/vavai/riv/zamer
issn
  • 1840-4944
number of pages
http://localhost/t...ganizacniJednotka
  • 27710
is http://linked.open...avai/riv/vysledek of
Faceted Search & Find service v1.16.118 as of Jun 21 2024


Alternative Linked Data Documents: ODE     Content Formats:   [cxml] [csv]     RDF   [text] [turtle] [ld+json] [rdf+json] [rdf+xml]     ODATA   [atom+xml] [odata+json]     Microdata   [microdata+json] [html]    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 117 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software