About: Springback analysis of intricate shape stamping from various materials with the use of finite elements method.

Facets (new session)
Description
Metadata
Settings
- owl:sameAs
- Inference Rule:

About: Springback analysis of intricate shape stamping from various materials with the use of finite elements method. Goto Sponge NotDistinct Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

Attributes	Values
rdf:type	skos:Concept http://linked.opendata.cz/ontology/domain/vavai/Vysledek
Description	Paper concerns drawing operation including related consequent springback of intricate shape stamping from thin sheet-metal – internal reinforcement of car bodyshell B-pillar in order to keep after drawing process the dimensions and tolerances of stamping after drawing process which are given in part drawing. Simulation of drawing process and consequent springback simulations were carried out in CAE software PAM-STAMP 2G 2011 which uses finite element method. In contribution the drawing process simulation of car bodyshell B-pillar is detailly described in this program, choice of suitable solver for separate drawing simulation stages, consequent springback simulations for four strip steels with the use of two mesh strategies and their mutual comparison. For given stamping shape the best strip steels were evaluated from point of view of drawability and reaching minimal springback size. In the end of the paper the method of tuning of sizes of drawing tool in order to achieve the state when final stamping deviations will correspond to tolerances specified at part drawing is described. Paper concerns drawing operation including related consequent springback of intricate shape stamping from thin sheet-metal – internal reinforcement of car bodyshell B-pillar in order to keep after drawing process the dimensions and tolerances of stamping after drawing process which are given in part drawing. Simulation of drawing process and consequent springback simulations were carried out in CAE software PAM-STAMP 2G 2011 which uses finite element method. In contribution the drawing process simulation of car bodyshell B-pillar is detailly described in this program, choice of suitable solver for separate drawing simulation stages, consequent springback simulations for four strip steels with the use of two mesh strategies and their mutual comparison. For given stamping shape the best strip steels were evaluated from point of view of drawability and reaching minimal springback size. In the end of the paper the method of tuning of sizes of drawing tool in order to achieve the state when final stamping deviations will correspond to tolerances specified at part drawing is described. (en)
Title	Springback analysis of intricate shape stamping from various materials with the use of finite elements method. Springback analysis of intricate shape stamping from various materials with the use of finite elements method. (en)
skos:prefLabel	Springback analysis of intricate shape stamping from various materials with the use of finite elements method. Springback analysis of intricate shape stamping from various materials with the use of finite elements method. (en)
skos:notation	RIV/61989100:27230/12:86083554!RIV13-MSM-27230___
http://linked.open...avai/predkladatel	Fakulta strojní
http://linked.open...avai/riv/aktivita	S
http://linked.open...avai/riv/aktivity	S
http://linked.open...iv/cisloPeriodika	1
http://linked.open...vai/riv/dodaniDat	2013
http://linked.open...aciTvurceVysledku	Čada, Radek Tiller, Petr
http://linked.open.../riv/druhVysledku	J - Článek v odborném periodiku
http://linked.open...iv/duvernostUdaju	S - Úplné a pravdivé údaje nepodléhající ochraně podle zvláštních právních předpisů
http://linked.open...titaPredkladatele	Vysoká škola báňská - Technická univerzita Ostrava / Fakulta strojní
http://linked.open...dnocenehoVysledku	170655
http://linked.open...ai/riv/idVysledku	RIV/61989100:27230/12:86083554
http://linked.open...riv/jazykVysledku	eng - angličtina
http://linked.open.../riv/klicovaSlova	finite elements method; drawing; simulation; tool; spring-back; sheet-metal; stamping (en)
http://linked.open.../riv/klicoveSlovo	stamping finite elements method sheet-metal simulation tool drawing spring-back
http://linked.open...odStatuVydavatele	CZ - Česká republika
http://linked.open...ontrolniKodProRIV	[993A310F6697]
http://linked.open...i/riv/nazevZdroje	Transactions of the VŠB - Technical University of Ostrava, Mechanical Series
http://linked.open...in/vavai/riv/obor	JR
http://linked.open...ichTvurcuVysledku	2 (xsd:int)
http://linked.open...cetTvurcuVysledku	2 (xsd:int)
http://linked.open...UplatneniVysledku	2012
http://linked.open...v/svazekPeriodika	58
http://linked.open...iv/tvurceVysledku	Čada, Radek Tiller, Petr
issn	1210-0471
number of pages	15 (xsd:int)
http://localhost/t...ganizacniJednotka	27230
is http://linked.open...avai/riv/vysledek of	Springback analysis of intricate shape stamping from various materials with the use of finite elements method.

Faceted Search & Find service v1.16.118 as of Jun 21 2024

Alternative Linked Data Documents: ODE Content Formats:

RDF

ODATA

Microdata

About

OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 58 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software