Attributes | Values |
---|
rdf:type
| |
Description
| - We used the %22porcupine%22 cutter Iscar H490 with ANKX inserts. The tool has two flutes and 5 inserts in axial directions. Due to the maximum clamping diameter D = 16 mm of the dynamometer, the tool shank had to be reduced to 16 mm. The radial eccentricity was measured after the reduction and the result was 0,01mm. Maximum cutting speed of the insert is 250 m/min and maximum chip thickness is 0,15 mm. The material of the work piece was carbon steel CSN 11 483 (1.0570) approx. 500MPa. The matching material from the material library is Alloy Steels_220BHN-21HRC.
- We used the %22porcupine%22 cutter Iscar H490 with ANKX inserts. The tool has two flutes and 5 inserts in axial directions. Due to the maximum clamping diameter D = 16 mm of the dynamometer, the tool shank had to be reduced to 16 mm. The radial eccentricity was measured after the reduction and the result was 0,01mm. Maximum cutting speed of the insert is 250 m/min and maximum chip thickness is 0,15 mm. The material of the work piece was carbon steel CSN 11 483 (1.0570) approx. 500MPa. The matching material from the material library is Alloy Steels_220BHN-21HRC. (en)
|
Title
| - Porcupine cutter test cutting
- Porcupine cutter test cutting (en)
|
skos:prefLabel
| - Porcupine cutter test cutting
- Porcupine cutter test cutting (en)
|
skos:notation
| - RIV/49777513:23210/14:43924499!RIV15-MSM-23210___
|
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/49777513:23210/14:43924499
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| |
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...telVyzkumneZpravy
| |
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...iv/tvurceVysledku
| - Kutlwašer, Jan
- Sklenička, Josef
- Hnátík, Jan
- Tenk, Jiří
|
number of pages
| |
http://localhost/t...ganizacniJednotka
| |