Attributes | Values |
---|
rdf:type
| |
Description
| - The mechanical properties of samples taken from different parts of a 650 mm long steam turbine blade forged fromFe–25Al–2Ta(in at.%)by conventionalforging on acounter blow hammer were examined. The hardness, brittle-to-ductile transition temperatures (BDTT), theyield stress in compression and in tension, and the creep behaviour were studied and compared with the same material in the as-cast and heat-treated state.Though forging apparently improves the mechanical properties they are still not optimal because of a too large grain size which stems from the insufficiently refined microstructure in the cast precursors. Because some distinct features were observed during creep testing, microstructures of crept samples were investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM).These investigations revealed that the increased creep resistance below 700 oC is caused by crystallographically oriented sub-micron sized precipitates of a Heusler phase.
- The mechanical properties of samples taken from different parts of a 650 mm long steam turbine blade forged fromFe–25Al–2Ta(in at.%)by conventionalforging on acounter blow hammer were examined. The hardness, brittle-to-ductile transition temperatures (BDTT), theyield stress in compression and in tension, and the creep behaviour were studied and compared with the same material in the as-cast and heat-treated state.Though forging apparently improves the mechanical properties they are still not optimal because of a too large grain size which stems from the insufficiently refined microstructure in the cast precursors. Because some distinct features were observed during creep testing, microstructures of crept samples were investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM).These investigations revealed that the increased creep resistance below 700 oC is caused by crystallographically oriented sub-micron sized precipitates of a Heusler phase. (en)
|
Title
| - Mechanical properties of a forged Fe-25Al-2Ta steam turbine blade
- Mechanical properties of a forged Fe-25Al-2Ta steam turbine blade (en)
|
skos:prefLabel
| - Mechanical properties of a forged Fe-25Al-2Ta steam turbine blade
- Mechanical properties of a forged Fe-25Al-2Ta steam turbine blade (en)
|
skos:notation
| - RIV/46747885:24210/10:#0001598!RIV11-GA0-24210___
|
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| |
http://linked.open...iv/cisloPeriodika
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/46747885:24210/10:#0001598
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - Ironaluminides, based on Fe3Al; Mechanical properties at high temperatures; Creep (properties and mechanisms); Microstructure; Yield stress (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...odStatuVydavatele
| - GB - Spojené království Velké Británie a Severního Irska
|
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...i/riv/nazevZdroje
| |
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...vavai/riv/projekt
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...v/svazekPeriodika
| |
http://linked.open...iv/tvurceVysledku
| - HANUS, Pavel
- BARTSCH, E.
- BAUER-PARTENHEIMER, K.
- JANSCHEK, P.
- KREIN, R.
- PALMA, M.
|
http://linked.open...ain/vavai/riv/wos
| |
issn
| |
number of pages
| |
http://localhost/t...ganizacniJednotka
| |
is http://linked.open...avai/riv/vysledek
of | |