| Attributes | Values |
|---|
| rdf:type
| |
| Description
| - The article focuses on the severe plastic deformation (SPD) of low carbon steel AISI 1010 performed at increased temperature. The grain refinement of ferrite structure is monitored and described with respect to different initial steel structure modified by thermal and thermomechanical (TM) treatment (TM) prior severe plastic deformation. The refinement of coarse initial ferrite structure with grain size in range of 30 – 50 gm resulted from solutioning was conducted then in two steps. Preliminary structure refinement has been achieved due to multistep open die forging process and quite uniform ferrite structure with grain size of the order of gm was obtained. The further grain refinement steel structure was then accomplished during warm Equal Channel Angular Pressing (ECAP = 120°) at 300°C, introducing different strain in range of ?ef = 2.6 -4. The change of microstructure in dependence of the effective strain was evaluated by SEM and TEM study of thin foils. The high straining of steel resulted in extensive deformation of ferrite grains and formation of mixture of submicron grains structure in banded deformed structure with dense dislocation network and subgrains. The dynamic polygonization process, due to increased ECAP temperature, modified the submicrocrystalline structure formation. There was only indistinctive difference observed in structure refinement when considering different initial structure of steel. The tensile behaviour was characterized by strength increase followed by softening. None work hardening phenomenon appeared at tensile deformation of deformed bars.
- The article focuses on the severe plastic deformation (SPD) of low carbon steel AISI 1010 performed at increased temperature. The grain refinement of ferrite structure is monitored and described with respect to different initial steel structure modified by thermal and thermomechanical (TM) treatment (TM) prior severe plastic deformation. The refinement of coarse initial ferrite structure with grain size in range of 30 – 50 gm resulted from solutioning was conducted then in two steps. Preliminary structure refinement has been achieved due to multistep open die forging process and quite uniform ferrite structure with grain size of the order of gm was obtained. The further grain refinement steel structure was then accomplished during warm Equal Channel Angular Pressing (ECAP = 120°) at 300°C, introducing different strain in range of ?ef = 2.6 -4. The change of microstructure in dependence of the effective strain was evaluated by SEM and TEM study of thin foils. The high straining of steel resulted in extensive deformation of ferrite grains and formation of mixture of submicron grains structure in banded deformed structure with dense dislocation network and subgrains. The dynamic polygonization process, due to increased ECAP temperature, modified the submicrocrystalline structure formation. There was only indistinctive difference observed in structure refinement when considering different initial structure of steel. The tensile behaviour was characterized by strength increase followed by softening. None work hardening phenomenon appeared at tensile deformation of deformed bars. (en)
|
| Title
| - Prior thermo-mechanical processing to modify structure and properties of severely deformed low carbon steel
- Prior thermo-mechanical processing to modify structure and properties of severely deformed low carbon steel (en)
|
| skos:prefLabel
| - Prior thermo-mechanical processing to modify structure and properties of severely deformed low carbon steel
- Prior thermo-mechanical processing to modify structure and properties of severely deformed low carbon steel (en)
|
| skos:notation
| - RIV/26316919:_____/14:#0000594!RIV15-MSM-26316919
|
| http://linked.open...avai/riv/aktivita
| |
| http://linked.open...avai/riv/aktivity
| |
| http://linked.open...vai/riv/dodaniDat
| |
| http://linked.open...aciTvurceVysledku
| |
| http://linked.open.../riv/druhVysledku
| |
| http://linked.open...iv/duvernostUdaju
| |
| http://linked.open...titaPredkladatele
| |
| http://linked.open...dnocenehoVysledku
| |
| http://linked.open...ai/riv/idVysledku
| - RIV/26316919:_____/14:#0000594
|
| http://linked.open...riv/jazykVysledku
| |
| http://linked.open.../riv/klicovaSlova
| - severe plastic deformation, low carbon steel, TM treatment, ECAP deformation, grain structure refinement, tensile properties (en)
|
| http://linked.open.../riv/klicoveSlovo
| |
| http://linked.open...ontrolniKodProRIV
| |
| http://linked.open...v/mistoKonaniAkce
| |
| http://linked.open...i/riv/mistoVydani
| |
| http://linked.open...i/riv/nazevZdroje
| - 6th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD6)
|
| http://linked.open...in/vavai/riv/obor
| |
| http://linked.open...ichTvurcuVysledku
| |
| http://linked.open...cetTvurcuVysledku
| |
| http://linked.open...vavai/riv/projekt
| |
| http://linked.open...UplatneniVysledku
| |
| http://linked.open...iv/tvurceVysledku
| - Zrník, Jozef
- Lapovok, R.
- Raab, G.
|
| http://linked.open...vavai/riv/typAkce
| |
| http://linked.open.../riv/zahajeniAkce
| |
| issn
| |
| number of pages
| |
| http://bibframe.org/vocab/doi
| - 10.1088/1757-899X/63/1/012066
|
| http://purl.org/ne...btex#hasPublisher
| |
![[RDF Data]](/fct/images/sw-rdf-blue.png)
![[cxml]](/fct/images/cxml_doc.png)
![[csv]](/fct/images/csv_doc.png)
![[text]](/fct/images/ntriples_doc.png)
![[turtle]](/fct/images/n3turtle_doc.png)
![[ld+json]](/fct/images/jsonld_doc.png)
![[rdf+json]](/fct/images/json_doc.png)
![[rdf+xml]](/fct/images/xml_doc.png)
![[atom+xml]](/fct/images/atom_doc.png)
![[html]](/fct/images/html_doc.png)