Attributes | Values |
---|
rdf:type
| |
Description
| - We deposited protective coatings on polycarbonates from hexamethyldisiloxane (HMDSO) and HMDSO/O2 mixtures by plasma enhanced CVD method. We studied especially deposition rate, optical constants in UV/VIS, film composition and mechanical properties in dependence on rf power and oxygen to HMDSO flow rate ratio. Plasma polymer HMDSO films (PP-HMDSO)showed good transparency in the visible and increased absorption in UV region. The optical constants of HMDSO/O2 films were similar to the tabulated SiO2. In general, the films were characterised by a relative high content of hydrogen (22-66 %) and a carbon content below 20 %. The films deposited at the oxygen to HMDSO flow rate ratio higher than 15 exhibit higher tensile stress and higher hardness than those prepared at ratios of 5-10. The nature of the internal stress changed to compressive for PP-HMDSO. Plasma pretreatment of polycarbonate in argon significantly improved the film adherence especially when low powers and short treatment times were used.
- We deposited protective coatings on polycarbonates from hexamethyldisiloxane (HMDSO) and HMDSO/O2 mixtures by plasma enhanced CVD method. We studied especially deposition rate, optical constants in UV/VIS, film composition and mechanical properties in dependence on rf power and oxygen to HMDSO flow rate ratio. Plasma polymer HMDSO films (PP-HMDSO)showed good transparency in the visible and increased absorption in UV region. The optical constants of HMDSO/O2 films were similar to the tabulated SiO2. In general, the films were characterised by a relative high content of hydrogen (22-66 %) and a carbon content below 20 %. The films deposited at the oxygen to HMDSO flow rate ratio higher than 15 exhibit higher tensile stress and higher hardness than those prepared at ratios of 5-10. The nature of the internal stress changed to compressive for PP-HMDSO. Plasma pretreatment of polycarbonate in argon significantly improved the film adherence especially when low powers and short treatment times were used. (en)
|
Title
| - Plasma modification of polycarbonates
- Plasma modification of polycarbonates (en)
|
skos:prefLabel
| - Plasma modification of polycarbonates
- Plasma modification of polycarbonates (en)
|
skos:notation
| - RIV/00216224:14310/01:00004619!RIV/2002/MSM/143102/N
|
http://linked.open.../vavai/riv/strany
| |
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| - P(GA202/00/P037), P(GV106/96/K245), P(GV202/97/K038), P(KSK1010104), P(VS96084), Z(AV0Z1048901), Z(MSM 143100003)
|
http://linked.open...iv/cisloPeriodika
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/00216224:14310/01:00004619
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - Plasma modification of polycarbonates (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...odStatuVydavatele
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...i/riv/nazevZdroje
| - Surface & coatings technology
|
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...ocetUcastnikuAkce
| |
http://linked.open...nichUcastnikuAkce
| |
http://linked.open...vavai/riv/projekt
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...v/svazekPeriodika
| |
http://linked.open...iv/tvurceVysledku
| - Buršíková, Vilma
- Janča, Jan
- Macková, Anna
- Zajíčková, Lenka
- Peřina, Vratislav
- Smirnov, Sergej
- Subedi, Deepak Prasad
|
http://linked.open...n/vavai/riv/zamer
| |
issn
| |
number of pages
| |
http://localhost/t...ganizacniJednotka
| |