The main objective of the proposed project is to determine the temperature and time dependence softening during deformation of AZ31 magnesium alloy. Specimens will be deformed at a constant strain rate over a wide temperature range from room temperature to 300 °C. Stress relaxation tests will be performed at each testing temperature at different stresses(strains). The activation volume will be estimated. The differences between the flow stress after stress relaxation and the flow stress at the beginning the stress relaxation will be measured. An analyses the differences as a function of strain and temperature will give information on microstructural changes caused by a decrease in the dislocation density connected with the internal stress and the changes due to diffusion of solute atoms to moving dislocations. Some specimens will be annealed at higher temperatures after deformation to certain strains. The microstructural changes will be measured using light microscopy. (en)
Hlavním cílem projektu je určit teplotní a časovou závislost odpevnění během deformace hořčíkové slitiny AZ31. Vzorky budou deformovány konstatní deformační rychlostí v intervalu teplot od pokojové teploty do 300 °C. Při každé deformační teplotě budou provedeny napěťové relaxace. Z napěťových relacxačních křivek bude určen aktivační objem. Rozdíl mezi deformačním napětím po napěťové relaxaci a napětím na začátku relaxace bude měřen a analyzován. Analýza napěťových rozdílů jako funkce stupně deformace a teploty poskytne informace o změnách v mikrostruktuře spůsobené poklesem hustoty dislokací a změnám v důsledku difúze cizích atomů k pohybujícím se dislokacím. Několik vzorků po deformaci k jistým stupňům deformace budou žíhány při vyšších teplotách. Změny mikrostruktury budou sledovány světelným mikroskopem. Bude možné identifikovat změny interního a efektivního napětí jako funkce deformačního napětí (stupně deformace) a teploty.
Odpevňovací mechanismy slitiny AZ31 jsou výsledkem interakce bazálních a nebazálních dislokací. Malé převýšení v napěťové závislosti koeficientu zpevnění je způsobeno přechodem z bazálního do nebazálního skluzu. (cs)
Softening mechanisms in AZ31 alloy is explained as a result of the interaction between basal and non-basal dislokations. A hump in the stress dependence of the strain hardening rate is due to transition from basal to non-basal slip. (en)