Attributes | Values |
---|
rdf:type
| |
Description
| - Along with conventionally extruded rods, self-reinforced polyethylene rods were prepared using a conventional extruder equipped with a converging extrusion die. From the work it is apparent that self-reinforced rods showed elastic modulus nearly 4 times higher than that of conventionally extruded rods. Scanning electron microscopy revealed that the morphology of the self-reinforced samples was fibrous and that the fibrils were extended straight along the extrusion direction. Moreover, the self-reinforced samples melted at higher temperature than the samples which had been prepared conventionally.
- Along with conventionally extruded rods, self-reinforced polyethylene rods were prepared using a conventional extruder equipped with a converging extrusion die. From the work it is apparent that self-reinforced rods showed elastic modulus nearly 4 times higher than that of conventionally extruded rods. Scanning electron microscopy revealed that the morphology of the self-reinforced samples was fibrous and that the fibrils were extended straight along the extrusion direction. Moreover, the self-reinforced samples melted at higher temperature than the samples which had been prepared conventionally. (en)
- Spolu s konvenčně vytlačovanými strunami byly vytlačované taktéž struny samovyztužené a to užitím konvenčního vytlačovacího stroje vybaveného sbíhavou vytlačovací hlavou. Z práce vyplývá, že samovyztužené struny mají čtyřikrát vyšší elastický modul než struny vyráběné běžnou extruzí. Dále byla provedena skenovací elektronová mikroskopie, která odhalila, že morfologie samozpevněného vzorku je fibrilární, a že jednotlivé fibrily jsou natažen ve směru vytlačování. Navíc, tyto vzorky tály při vyšší teplotě než vzorky připravované běžným způsobem. (cs)
|
Title
| - Samozpevnění vysokohustotního polyetylénu (cs)
- Self-Reinforcement of High-Density Polyethylene
- Self-Reinforcement of High-Density Polyethylene (en)
|
skos:prefLabel
| - Samozpevnění vysokohustotního polyetylénu (cs)
- Self-Reinforcement of High-Density Polyethylene
- Self-Reinforcement of High-Density Polyethylene (en)
|
skos:notation
| - RIV/70883521:28110/04:63502345!RIV/2005/GA0/281105/N
|
http://linked.open.../vavai/riv/strany
| |
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/70883521:28110/04:63502345
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - PE-HD; extrusion; flow-induced crystallization; self-reinforcement; morphology; mechanical properties (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...v/mistoKonaniAkce
| |
http://linked.open...i/riv/mistoVydani
| |
http://linked.open...i/riv/nazevZdroje
| - ANTEC 2004, Proceedings of the 62nd Annual Technical Conference
|
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...vavai/riv/projekt
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...iv/tvurceVysledku
| - Habrová, Veronika
- Čermák, Roman
- Obadal, Martin
- Polášková, Martina
- Stoklasa, Karel
|
http://linked.open...vavai/riv/typAkce
| |
http://linked.open.../riv/zahajeniAkce
| |
number of pages
| |
http://purl.org/ne...btex#hasPublisher
| - Society of Plastics Engineers
|
https://schema.org/isbn
| |
http://localhost/t...ganizacniJednotka
| |