About: Analysis Of Finishing NC Programs From Two Different CAM Systems     Goto   Sponge   NotDistinct   Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

AttributesValues
rdf:type
Description
  • The article concerns with the comparison of toolpaths in NC programs using different possibilities of output format in two different CAM systems. The toolpath is defined by number of NC blocks and its interpolation type. The number of NC blocks depends on the toolpath computation tolerance value specified by a production engineer in the CAM system just as the interpolation type. The interpolation type will affect the interpretation of NC program by a control system. Therefore it has been come up to measure the feed-rate profile along the different toolpaths using a contactless sensor. A blade used in the turbine has been chosen for testing toolpaths creation. In the article, there are shown the measured characteristics of feed-rate between the tool and the workpiece using a different toolpaths from two different CAM systems and the machining time is observed too. CAM systems Siemens NX and CATIA have been chosen for creation of toolpaths. Sinumerik 840D control system on an experimental machine LM1 has been used for interpretation of NC programs.
  • The article concerns with the comparison of toolpaths in NC programs using different possibilities of output format in two different CAM systems. The toolpath is defined by number of NC blocks and its interpolation type. The number of NC blocks depends on the toolpath computation tolerance value specified by a production engineer in the CAM system just as the interpolation type. The interpolation type will affect the interpretation of NC program by a control system. Therefore it has been come up to measure the feed-rate profile along the different toolpaths using a contactless sensor. A blade used in the turbine has been chosen for testing toolpaths creation. In the article, there are shown the measured characteristics of feed-rate between the tool and the workpiece using a different toolpaths from two different CAM systems and the machining time is observed too. CAM systems Siemens NX and CATIA have been chosen for creation of toolpaths. Sinumerik 840D control system on an experimental machine LM1 has been used for interpretation of NC programs. (en)
Title
  • Analysis Of Finishing NC Programs From Two Different CAM Systems
  • Analysis Of Finishing NC Programs From Two Different CAM Systems (en)
skos:prefLabel
  • Analysis Of Finishing NC Programs From Two Different CAM Systems
  • Analysis Of Finishing NC Programs From Two Different CAM Systems (en)
skos:notation
  • RIV/68407700:21220/12:00197757!RIV13-MSM-21220___
http://linked.open...avai/riv/aktivita
http://linked.open...avai/riv/aktivity
  • S
http://linked.open...iv/cisloPeriodika
  • special IS
http://linked.open...vai/riv/dodaniDat
http://linked.open...aciTvurceVysledku
http://linked.open.../riv/druhVysledku
http://linked.open...iv/duvernostUdaju
http://linked.open...titaPredkladatele
http://linked.open...dnocenehoVysledku
  • 122138
http://linked.open...ai/riv/idVysledku
  • RIV/68407700:21220/12:00197757
http://linked.open...riv/jazykVysledku
http://linked.open.../riv/klicovaSlova
  • NC program; toolpath; interpolation; feed-rate (en)
http://linked.open.../riv/klicoveSlovo
http://linked.open...odStatuVydavatele
  • CZ - Česká republika
http://linked.open...ontrolniKodProRIV
  • [55FA74FCCE88]
http://linked.open...i/riv/nazevZdroje
  • MM Science Journal
http://linked.open...in/vavai/riv/obor
http://linked.open...ichTvurcuVysledku
http://linked.open...cetTvurcuVysledku
http://linked.open...UplatneniVysledku
http://linked.open...iv/tvurceVysledku
  • Vavruška, Petr
issn
  • 1805-0476
number of pages
http://localhost/t...ganizacniJednotka
  • 21220
Faceted Search & Find service v1.16.118 as of Jun 21 2024


Alternative Linked Data Documents: ODE     Content Formats:   [cxml] [csv]     RDF   [text] [turtle] [ld+json] [rdf+json] [rdf+xml]     ODATA   [atom+xml] [odata+json]     Microdata   [microdata+json] [html]    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 48 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software