Attributes | Values |
---|
rdf:type
| |
Description
| - Rychlost frézovacího nástroje hraje zásadní roli při distribuci tepla mezi nástrojem, třískou a obrobkem. V určité oblasti řezných rychlostí přechází proces konvenčního frézování na tzv. obrábění vysokými rychlostmi (HSC). Tato oblast je charakterizována především poklesem teploty na rozhraní nástroj-obrobek a nižší drsností obrobeného povrchu. V tomto příspěvku je zkoumán vliv různých frézovacích režimů na mikrotvrdost povrchové vrstvy, drsnost povrchu a zbytková napětí v povrchové vrstvě obrobené plochy, a to pro řezné rychlosti mezi 150 až 1000 m.min-1. (cs)
- Spinning velocity of a milling tool plays a vital role in the distribution of heat between the tool, chip and workpiece. Upon surpassing a certain value, the process of traditional milling turns into the so called high speed cutting (HSC). HSC is above all characterized by decreasing temperature on the tool-workpiece interface and lower roughness with increasing cutting speed. In this contribution, microhardness, surface roughness and the state of residual stress in surface layers of milled steels is investigated from the point of view of various milling regimes with cutting speeds ranging from 150 to 1000 meters per minute.
- Spinning velocity of a milling tool plays a vital role in the distribution of heat between the tool, chip and workpiece. Upon surpassing a certain value, the process of traditional milling turns into the so called high speed cutting (HSC). HSC is above all characterized by decreasing temperature on the tool-workpiece interface and lower roughness with increasing cutting speed. In this contribution, microhardness, surface roughness and the state of residual stress in surface layers of milled steels is investigated from the point of view of various milling regimes with cutting speeds ranging from 150 to 1000 meters per minute. (en)
|
Title
| - Investigation of Milled Surfaces of High-alloy Tool Steels
- Výzkum vlivu řezné rychlosti na obrobený povrch při frézování vysocelegované nástrojové oceli (cs)
- Investigation of Milled Surfaces of High-alloy Tool Steels (en)
|
skos:prefLabel
| - Investigation of Milled Surfaces of High-alloy Tool Steels
- Výzkum vlivu řezné rychlosti na obrobený povrch při frézování vysocelegované nástrojové oceli (cs)
- Investigation of Milled Surfaces of High-alloy Tool Steels (en)
|
skos:notation
| - RIV/68407700:21220/07:02141417!RIV08-MSM-21220___
|
http://linked.open.../vavai/riv/strany
| |
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| |
http://linked.open...iv/cisloPeriodika
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/68407700:21220/07:02141417
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - residual stress; side milling (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...odStatuVydavatele
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...i/riv/nazevZdroje
| |
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...vavai/riv/projekt
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...v/svazekPeriodika
| |
http://linked.open...iv/tvurceVysledku
| - Ganev, Nikolaj
- Kolařík, Kamil
- Zeman, Pavel
- Bakalová, T.
|
issn
| |
number of pages
| |
http://localhost/t...ganizacniJednotka
| |