About: Effect of Cutting Parameters on Thermal Phenomens and Surface Roughness in HSC     Goto   Sponge   NotDistinct   Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

AttributesValues
rdf:type
Description
  • The paper describes some results of the research into roughness of the machined surface and the cutting temperature in high speed milling of aluminium alloy 2024-T351. The effect of cutting speed and feed on roughness of the machined surface and cutting temperature has bien studied. The experimental research was carried out by with sintered carbide inserts. It was focused on the roughness parameters Ra and Rz of the machined surface and the cutting temperature. The roughness parameters were measured immediately after machining of the surface. The measuring was carried out in the axis of the cutting tool by with using of the Taylor Hobson surface texture analyzer model Surftronic 3+. The results were consequently analyzed by with software TalyProfile.The cutting temperature was measured by the tool-workpiece thermocouple, which is composed from the tool and workpiece materials. The signal from the thermocouple was scanned by the data switch exchange.
  • The paper describes some results of the research into roughness of the machined surface and the cutting temperature in high speed milling of aluminium alloy 2024-T351. The effect of cutting speed and feed on roughness of the machined surface and cutting temperature has bien studied. The experimental research was carried out by with sintered carbide inserts. It was focused on the roughness parameters Ra and Rz of the machined surface and the cutting temperature. The roughness parameters were measured immediately after machining of the surface. The measuring was carried out in the axis of the cutting tool by with using of the Taylor Hobson surface texture analyzer model Surftronic 3+. The results were consequently analyzed by with software TalyProfile.The cutting temperature was measured by the tool-workpiece thermocouple, which is composed from the tool and workpiece materials. The signal from the thermocouple was scanned by the data switch exchange. (en)
  • Článek popisuje vybrané výsledky výzkumu drsnosti obrobeného povrchu a teploty řezání při vysokorychlostním frézování hliníkové slitiny Al 2024-T351. Byl studován zejména vliv řezné a posuvové rychlosti na vybrané parametry drsnosti obrobeného povrchu a na teplotu řezání. Experimenty byly provedeny nástrojem s nepovlakovanými výměnnými břitovými destičkami ze slinutého karbidu typu K. Výzkum byl zaměřen na sledování parametrů drsnosti Ra a Rz obrobeného povrchu. Měření bylo prováděno ihned po obrábění na obrobeném povrchu v ose obráběcího nástroje použitím drsnoměru Surftronic 3+ od firmy Taylor Hobson. Výsledky pak byly dále zpracovány softwarem Taly Profile. Teplota řezání byla měřena použitím přirozeného termočlánku, který je složen z materiálu nástroje a materiálu obrobku. Signál z přirozeného termočlánku byl snímán měřicí ústřednou a následně byl vyhodnocován. (cs)
Title
  • Vliv řezných parametrů na tepelné jevy a drsnost obrobeného povrchu při vysokorychlostním obrábění (cs)
  • Effect of Cutting Parameters on Thermal Phenomens and Surface Roughness in HSC
  • Effect of Cutting Parameters on Thermal Phenomens and Surface Roughness in HSC (en)
skos:prefLabel
  • Vliv řezných parametrů na tepelné jevy a drsnost obrobeného povrchu při vysokorychlostním obrábění (cs)
  • Effect of Cutting Parameters on Thermal Phenomens and Surface Roughness in HSC
  • Effect of Cutting Parameters on Thermal Phenomens and Surface Roughness in HSC (en)
skos:notation
  • RIV/68407700:21220/04:02103779!RIV/2005/MSM/212205/N
http://linked.open.../vavai/riv/strany
  • 231 ; 234
http://linked.open...avai/riv/aktivita
http://linked.open...avai/riv/aktivity
  • P(LN00B128)
http://linked.open...vai/riv/dodaniDat
http://linked.open...aciTvurceVysledku
http://linked.open.../riv/druhVysledku
http://linked.open...iv/duvernostUdaju
http://linked.open...titaPredkladatele
http://linked.open...dnocenehoVysledku
  • 561848
http://linked.open...ai/riv/idVysledku
  • RIV/68407700:21220/04:02103779
http://linked.open...riv/jazykVysledku
http://linked.open.../riv/klicovaSlova
  • HSC; cutting temperature; milling; surface roughness; tool-workpiece thermocouple (en)
http://linked.open.../riv/klicoveSlovo
http://linked.open...ontrolniKodProRIV
  • [83A31A14196E]
http://linked.open...v/mistoKonaniAkce
  • Praha, Brno
http://linked.open...i/riv/mistoVydani
  • Horská 3, 128 00 Praha 2
http://linked.open...i/riv/nazevZdroje
  • Machine Tools, Automation and Robotics in Mechanical Engineering
http://linked.open...in/vavai/riv/obor
http://linked.open...ichTvurcuVysledku
http://linked.open...cetTvurcuVysledku
http://linked.open...vavai/riv/projekt
http://linked.open...UplatneniVysledku
http://linked.open...iv/tvurceVysledku
  • Mádl, Jan
  • Šafek, Jiří
http://linked.open...vavai/riv/typAkce
http://linked.open.../riv/zahajeniAkce
number of pages
http://purl.org/ne...btex#hasPublisher
  • SMT - Society for Machine Tools
https://schema.org/isbn
  • 80-903421-4-0
http://localhost/t...ganizacniJednotka
  • 21220
Faceted Search & Find service v1.16.118 as of Jun 21 2024


Alternative Linked Data Documents: ODE     Content Formats:   [cxml] [csv]     RDF   [text] [turtle] [ld+json] [rdf+json] [rdf+xml]     ODATA   [atom+xml] [odata+json]     Microdata   [microdata+json] [html]    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 58 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software