Attributes | Values |
---|
rdf:type
| |
Description
| - Druhá část článku shrnuje výsledky institucionálního výzkumu zaměřeného na stanovení fyzikálních a mechanických vlastností rozdílných soborů překližovaných desek lisovaných za odlišných podmínek. První část pojednávala o stanovení slisovatelnosti neboli hodnot zmenšení tloušťky lisovaných překližovaných desek a byla uveřejněna v JFS č. /05. V této druhé části jsou shrnuty výsledky analýzy fyzikálních a mechanických vlastností souboru překližovaných desek celobukových, o nominální tloušťce dýh 1,5 mm. Překližované desky byly vyrobeny jako sedmivrstvé a k jejich výrobě byla použita močovinoformaldehydová pryskyřice DUKOL S. Desky byly lisovány tlakem 1,5 a 1,7 MPa. Byly analyzovány vlhkost, hustota, pevnost v ohybu, modul pružnosti v ohybu a smyková pevnost (pevnost lepení) (cs)
- The second part of the paper summarizes results of an institutional research aimed at the determinativ of physical and mechanical properties of different sets of plywood sheets pressed under different conditions. The first part dealt with the determination of compressibility or values of decreasing the thickness of pressed plywood sheets. In this second part, results are summarized of the analysis of physical and mechanical properties of the set of whole-beech plywood sheets of the nominal thickness of veneers amounting to 1.5 mm. The plywood sheets were manufactured as seven-ply and urea-formaldehyde resin DUKOL S was used for their production. The sheets were pressed using a pressure of 1.5 and 1.7 MPa. Following parameters were analyzed: moisture, density, bending strength, MOE in bendingand shear strength
- The second part of the paper summarizes results of an institutional research aimed at the determinativ of physical and mechanical properties of different sets of plywood sheets pressed under different conditions. The first part dealt with the determination of compressibility or values of decreasing the thickness of pressed plywood sheets. In this second part, results are summarized of the analysis of physical and mechanical properties of the set of whole-beech plywood sheets of the nominal thickness of veneers amounting to 1.5 mm. The plywood sheets were manufactured as seven-ply and urea-formaldehyde resin DUKOL S was used for their production. The sheets were pressed using a pressure of 1.5 and 1.7 MPa. Following parameters were analyzed: moisture, density, bending strength, MOE in bendingand shear strength (en)
|
Title
| - Effects of the thickness of rotary-cut veneers on properties of plywood sheets. Part 2. Physical and mechanical properties of plywood materials
- Effects of the thickness of rotary-cut veneers on properties of plywood sheets. Part 2. Physical and mechanical properties of plywood materials (en)
- Vliv tloušťky loupaných dýh na vlastnosti překližovaných desek (cs)
|
skos:prefLabel
| - Effects of the thickness of rotary-cut veneers on properties of plywood sheets. Part 2. Physical and mechanical properties of plywood materials
- Effects of the thickness of rotary-cut veneers on properties of plywood sheets. Part 2. Physical and mechanical properties of plywood materials (en)
- Vliv tloušťky loupaných dýh na vlastnosti překližovaných desek (cs)
|
skos:notation
| - RIV/62156489:43410/06:00097929!RIV07-MSM-43410___
|
http://linked.open.../vavai/riv/strany
| |
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| |
http://linked.open...iv/cisloPeriodika
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/62156489:43410/06:00097929
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - MOE in bending; bending strength; moisture; plywood; shear strength; statistical analysis; veneer (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...odStatuVydavatele
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...i/riv/nazevZdroje
| - Journal of Forest Science
|
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...v/svazekPeriodika
| |
http://linked.open...iv/tvurceVysledku
| - Hrázský, Jaroslav
- Král, Pavel
|
http://linked.open...n/vavai/riv/zamer
| |
issn
| |
number of pages
| |
http://localhost/t...ganizacniJednotka
| |