Attributes | Values |
---|
rdf:type
| |
Description
| - Článek shrnuje výsledky institucionálního výzkumu zaměřeného na stanovení slisovatelnosti neboli hodnot zmenšení tloušťky lisovaných překližovaných desek. Posouzení vlivu tloušťky a tloušťkových tolerancí použitých dýh na hodnotu slisovatelnosti v závislosti na výrobních parametrech bylo provedeno na souboru překližovaných desek celobukových o nominální tloušťce dýh 1,5 mm. Překližované desky byly vyrobeny jako sedmivrstvé a k jejich výrobě byla použita močovinoformaldehydová pryskyřice DUKOL S. Byla posuzována tloušťková rozdílnost, velikost sesýchání, slisovatelnost dýh. Desky byly lisovány tlakem 1,5 a 1,7 MPa. Zjištěné hodnoty změny tloušťky dýh ve vylisovaných překližovaných deskách a koeficienty slisování jednotlivých vlastností byly následně statisticky analyzovány. Bylo provedeno základní ekonomické vyhodnocení vlivu slisovatelnosti na výšku výrobních nákladů (cs)
- The paper summarizes results of the institutional research aimed at the determination of compressibility or values of the reduction of thickness of compressed plywood sheets. Assessing the effect of thickness and thickness tolerances of veneers to a value of compressibility in relation to production parameters was carried out on the collection of ply-wood whole-beech sheets of the nominal veneer thickness of 1.5 mm. The plywood sheets were manufactured as seven-ply ones and urea-formaldehyde resin DUKOL S was used for their manufacture. Following characteristics were assessed: thickness differences, size of shrinkage, compressibility of veneers. Sheets were pressed using a pressure of 1.5 and 1.7 MPa. Values of changes in the thickness of veneers in pressed veneer sheets and coefficients of compressibility of particular properties were then statistically analysed. Basic economic evaluation was carried out of the effect of compressibility on the amount of production costs
- The paper summarizes results of the institutional research aimed at the determination of compressibility or values of the reduction of thickness of compressed plywood sheets. Assessing the effect of thickness and thickness tolerances of veneers to a value of compressibility in relation to production parameters was carried out on the collection of ply-wood whole-beech sheets of the nominal veneer thickness of 1.5 mm. The plywood sheets were manufactured as seven-ply ones and urea-formaldehyde resin DUKOL S was used for their manufacture. Following characteristics were assessed: thickness differences, size of shrinkage, compressibility of veneers. Sheets were pressed using a pressure of 1.5 and 1.7 MPa. Values of changes in the thickness of veneers in pressed veneer sheets and coefficients of compressibility of particular properties were then statistically analysed. Basic economic evaluation was carried out of the effect of compressibility on the amount of production costs (en)
|
Title
| - Effects of the thickness of rotary-cut veneers on properties of plywood sheets. Part 1. Compressibility of plywood materials
- Effects of the thickness of rotary-cut veneers on properties of plywood sheets. Part 1. Compressibility of plywood materials (en)
- Vliv tloušťky loupaných dýh na vlastnosti překližovaných desek. Část 2. Fyzikální a me-chanické vlastnosti překližovaných materiálů (cs)
|
skos:prefLabel
| - Effects of the thickness of rotary-cut veneers on properties of plywood sheets. Part 1. Compressibility of plywood materials
- Effects of the thickness of rotary-cut veneers on properties of plywood sheets. Part 1. Compressibility of plywood materials (en)
- Vliv tloušťky loupaných dýh na vlastnosti překližovaných desek. Část 2. Fyzikální a me-chanické vlastnosti překližovaných materiálů (cs)
|
skos:notation
| - RIV/62156489:43410/05:00057306!RIV08-MSM-43410___
|
http://linked.open.../vavai/riv/strany
| |
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| |
http://linked.open...iv/cisloPeriodika
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/62156489:43410/05:00057306
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - MOE; plywood; compressibility; bending streght (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...odStatuVydavatele
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...i/riv/nazevZdroje
| - Journal of Forest Science
|
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...v/svazekPeriodika
| |
http://linked.open...iv/tvurceVysledku
| - Hrázský, Jaroslav
- Král, Pavel
|
http://linked.open...n/vavai/riv/zamer
| |
issn
| |
number of pages
| |
http://localhost/t...ganizacniJednotka
| |