Attributes | Values |
---|
rdf:type
| |
Description
| - Knowledge of the processes interconnected to steelmaking technologies is an essential precondition for continuous improvement of the quality of cast steel. The process of continuous casting of steel depends not only on the physical properties of steel, but also on many technological parameters. More accurate knowledge of the fundamental physical properties of solids and steel casting process parameters is therefore more up to date. Characteristics and quality of the continuously cast steel is closely related with the process of its own solidification. Important measures of the solidification process, inter alia, phase transformation temperatures, in particular the solidus and liquidus temperatures. Accurate knowledge of the liquidus temperature (TL) is particularly important for the temperature overheating of steel before casting. Solidus temperature (TS) is then associated with a particular course of its solidification process, when the two-phase zone in the interval between these temperatures leads to segregation phenomena. Increased demands that are placed on the quality of billets, such as achieving optimal steel structure, elimination of cracks and segregation, require precise knowledge of the temperature in connection with the correct setting of casting technology and the precise conditions during its solidification. This paper presents the applied research method realised at VŠB - TU Ostrava, Faculty of Metallurgy and Materials Engineering during the study of thermo -physical properties of metallic materials
- Knowledge of the processes interconnected to steelmaking technologies is an essential precondition for continuous improvement of the quality of cast steel. The process of continuous casting of steel depends not only on the physical properties of steel, but also on many technological parameters. More accurate knowledge of the fundamental physical properties of solids and steel casting process parameters is therefore more up to date. Characteristics and quality of the continuously cast steel is closely related with the process of its own solidification. Important measures of the solidification process, inter alia, phase transformation temperatures, in particular the solidus and liquidus temperatures. Accurate knowledge of the liquidus temperature (TL) is particularly important for the temperature overheating of steel before casting. Solidus temperature (TS) is then associated with a particular course of its solidification process, when the two-phase zone in the interval between these temperatures leads to segregation phenomena. Increased demands that are placed on the quality of billets, such as achieving optimal steel structure, elimination of cracks and segregation, require precise knowledge of the temperature in connection with the correct setting of casting technology and the precise conditions during its solidification. This paper presents the applied research method realised at VŠB - TU Ostrava, Faculty of Metallurgy and Materials Engineering during the study of thermo -physical properties of metallic materials (en)
|
Title
| - Experimental determination of the liquidus and solidus temperatures by using different methods of thermal analysis.
- Experimental determination of the liquidus and solidus temperatures by using different methods of thermal analysis. (en)
|
skos:prefLabel
| - Experimental determination of the liquidus and solidus temperatures by using different methods of thermal analysis.
- Experimental determination of the liquidus and solidus temperatures by using different methods of thermal analysis. (en)
|
skos:notation
| - RIV/61989100:27360/14:86089741!RIV15-TA0-27360___
|
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| - P(LO1203), P(TA03011277), S
|
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| - Socha, Ladislav
- Strouhalová, Michaela
- Michalek, Karel
- Smetana, Bedřich
- Zlá, Simona
- Žaludová, Monika
- Dobrovská, Jana
- Gryc, Karel
- Tkadlečková, Markéta
- Kalup, Aleš
|
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/61989100:27360/14:86089741
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - direct TA; DSC; DTA; thermal analysis; solidus temperature; liquidus temperature; steel (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...v/mistoKonaniAkce
| |
http://linked.open...i/riv/mistoVydani
| |
http://linked.open...i/riv/nazevZdroje
| - ISDM 2014 : [XXI. International Students' Day of Metallurgy : March 15-17th, 2014, TU Clausthal : proceedings]
|
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...vavai/riv/projekt
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...iv/tvurceVysledku
| - Dobrovská, Jana
- Gryc, Karel
- Michalek, Karel
- Smetana, Bedřich
- Socha, Ladislav
- Tkadlečková, Markéta
- Zlá, Simona
- Žaludová, Monika
- Strouhalová, Michaela
- Kalup, Aleš
|
http://linked.open...vavai/riv/typAkce
| |
http://linked.open.../riv/zahajeniAkce
| |
number of pages
| |
http://purl.org/ne...btex#hasPublisher
| - Technische Universität Clausthal
|
https://schema.org/isbn
| |
http://localhost/t...ganizacniJednotka
| |