About: Photoconductive cells from screen-printed and sintered cadmium sulfoselenide     Goto   Sponge   NotDistinct   Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

AttributesValues
rdf:type
Description
  • Purpose - Screen-printing is an appropriate technique for the manufacture of large-area position-sensitive detectors. We present simple methods of paste preparation and appropriate processing of thick films. Methodology - Active layers of photoconductive cells based on doped CdS0.32Se0.68 were prepared by screen-printing and sintering at 530 oC. A sulfide - selenide mixture or a mixed crystal material and propylene glycol was deposited as a paste. Propylene glycol served as the temporary paste binder. Cadmium chloride was used as a fluxing agent and a donor source. Copper(II) chloride was used as an acceptor source. The effect of the paste composition and sintering time on the resistance and slope of the resistance vs. illumination dependence of cells was investigated. These parameters were checked again after 8 years of cell storage.
  • Purpose - Screen-printing is an appropriate technique for the manufacture of large-area position-sensitive detectors. We present simple methods of paste preparation and appropriate processing of thick films. Methodology - Active layers of photoconductive cells based on doped CdS0.32Se0.68 were prepared by screen-printing and sintering at 530 oC. A sulfide - selenide mixture or a mixed crystal material and propylene glycol was deposited as a paste. Propylene glycol served as the temporary paste binder. Cadmium chloride was used as a fluxing agent and a donor source. Copper(II) chloride was used as an acceptor source. The effect of the paste composition and sintering time on the resistance and slope of the resistance vs. illumination dependence of cells was investigated. These parameters were checked again after 8 years of cell storage. (en)
  • Cíl: Sítotisk představuje vhodný způsob výroby velkoplošných senzorů detekujících polohu svazku dopadajícího světla. Cílem práce je představit jednoduchou metodu přípravy pasty a vhodný postup zpracování vrstvy. Postup: Aktivní vrstvy fotorezistorů tvořené dopovaným CdS0,32Se0,68 byly naneseny sítotiskem a následně sintrovány při 530 °C. Základem pasty byla směs sulfidu a selenidu nebo nebo materiál, který byl tuhým roztokem obou. Jako dočasné pojivo pasty byl použit propylenglykol (PG). Chlorid kademnatý byl použit jako tavidlo a zdroj donorů. Jako zdroj akceptorů byl přidán chlorid měďnatý. U vyrobených fotorezistorů byl sledován vliv složení pasty a doby sintrace na odpor a strmost závislosti odporu na osvětlení. Tyto parametry byly znovu přeměřeny po osmi letech skladování vzorků. Závěry Vlastnosti fotorezistorů jsou významně ovlivněny prodlevami mezi tiskem, sušením a sintrací vrstvy. (cs)
Title
  • Photoconductive cells from screen-printed and sintered cadmium sulfoselenide
  • Fotorezistory ze sulfoselenidu kademnatého nanášeného sítotiskem a následně sintrovaného (cs)
  • Photoconductive cells from screen-printed and sintered cadmium sulfoselenide (en)
skos:prefLabel
  • Photoconductive cells from screen-printed and sintered cadmium sulfoselenide
  • Fotorezistory ze sulfoselenidu kademnatého nanášeného sítotiskem a následně sintrovaného (cs)
  • Photoconductive cells from screen-printed and sintered cadmium sulfoselenide (en)
skos:notation
  • RIV/61389013:_____/08:00310707!RIV09-AV0-61389013
http://linked.open...avai/riv/aktivita
http://linked.open...avai/riv/aktivity
  • Z(AV0Z40400503), Z(AV0Z40500505)
http://linked.open...iv/cisloPeriodika
  • 3
http://linked.open...vai/riv/dodaniDat
http://linked.open...aciTvurceVysledku
http://linked.open.../riv/druhVysledku
http://linked.open...iv/duvernostUdaju
http://linked.open...titaPredkladatele
http://linked.open...dnocenehoVysledku
  • 386530
http://linked.open...ai/riv/idVysledku
  • RIV/61389013:_____/08:00310707
http://linked.open...riv/jazykVysledku
http://linked.open.../riv/klicovaSlova
  • photoconductivity; detectors (circuits); sintering; pastes (en)
http://linked.open.../riv/klicoveSlovo
http://linked.open...odStatuVydavatele
  • GB - Spojené království Velké Británie a Severního Irska
http://linked.open...ontrolniKodProRIV
  • [E166987DB778]
http://linked.open...i/riv/nazevZdroje
  • Microelectronics International
http://linked.open...in/vavai/riv/obor
http://linked.open...ichTvurcuVysledku
http://linked.open...cetTvurcuVysledku
http://linked.open...UplatneniVysledku
http://linked.open...v/svazekPeriodika
  • 25
http://linked.open...iv/tvurceVysledku
  • Nešpůrek, Stanislav
  • Franc, Jiří
http://linked.open...ain/vavai/riv/wos
  • 000259379800007
http://linked.open...n/vavai/riv/zamer
issn
  • 1356-5362
number of pages
Faceted Search & Find service v1.16.118 as of Jun 21 2024


Alternative Linked Data Documents: ODE     Content Formats:   [cxml] [csv]     RDF   [text] [turtle] [ld+json] [rdf+json] [rdf+xml]     ODATA   [atom+xml] [odata+json]     Microdata   [microdata+json] [html]    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 58 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software