About: Modification of veneers by lamination and steaming for the purpose of increasing 3D moldability

Facets (new session)
Description
Metadata
Settings
- owl:sameAs
- Inference Rule:

About: Modification of veneers by lamination and steaming for the purpose of increasing 3D moldability Goto Sponge NotDistinct Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

Attributes	Values
rdf:type	skos:Concept http://linked.opendata.cz/ontology/domain/vavai/Vysledek
Description	The focus of this work was to determine the 3D moldability of veneers on circular test pieces treated with steam plastification. These results were compared with results acquired from pieces laminated with three different types of laminating foils with thicknesses of 80, 100, and 125 µm before proper 3D molding. The purpose of test piece lamination was to change the degree of pre-stress and move the neutral plane into the laminating foil, which actually works as a flange. Results acquired from sets of test pieces modified by steam plastification and lamination were compared with the results acquired for the set of test pieces without any treatment. To determine the effects of wood type, the results obtained with beech wood of 0.5-mm thickness were compared with the results acquired from birch wood of 0.5-mm thickness using two types of spherical stamping tools with 20-mm and 40-mm diameters for molding the test pieces. The final examined characteristics were the means of attachment of the test pieces The focus of this work was to determine the 3D moldability of veneers on circular test pieces treated with steam plastification. These results were compared with results acquired from pieces laminated with three different types of laminating foils with thicknesses of 80, 100, and 125 µm before proper 3D molding. The purpose of test piece lamination was to change the degree of pre-stress and move the neutral plane into the laminating foil, which actually works as a flange. Results acquired from sets of test pieces modified by steam plastification and lamination were compared with the results acquired for the set of test pieces without any treatment. To determine the effects of wood type, the results obtained with beech wood of 0.5-mm thickness were compared with the results acquired from birch wood of 0.5-mm thickness using two types of spherical stamping tools with 20-mm and 40-mm diameters for molding the test pieces. The final examined characteristics were the means of attachment of the test pieces (en)
Title	Modification of veneers by lamination and steaming for the purpose of increasing 3D moldability Modification of veneers by lamination and steaming for the purpose of increasing 3D moldability (en)
skos:prefLabel	Modification of veneers by lamination and steaming for the purpose of increasing 3D moldability Modification of veneers by lamination and steaming for the purpose of increasing 3D moldability (en)
skos:notation	RIV/60460709:41320/14:64965!RIV15-MSM-41320___
http://linked.open...avai/riv/aktivita	S
http://linked.open...avai/riv/aktivity	S
http://linked.open...iv/cisloPeriodika	4
http://linked.open...vai/riv/dodaniDat	2015
http://linked.open...aciTvurceVysledku	Gaff, Milan
http://linked.open.../riv/druhVysledku	J - Článek v odborném periodiku
http://linked.open...iv/duvernostUdaju	S - Úplné a pravdivé údaje nepodléhající ochraně podle zvláštních právních předpisů
http://linked.open...titaPredkladatele	Česká zemědělská univerzita v Praze / Fakulta lesnická a dřevařská
http://linked.open...dnocenehoVysledku	30126
http://linked.open...ai/riv/idVysledku	RIV/60460709:41320/14:64965
http://linked.open...riv/jazykVysledku	eng - angličtina
http://linked.open.../riv/klicovaSlova	Veneer, 3D-molding, Plasticizing, Erichsen deep-drawing test, Moldability (en)
http://linked.open.../riv/klicoveSlovo	3D-molding Erichsen deep-drawing test Moldability Plasticizing Veneer
http://linked.open...odStatuVydavatele	CZ - Česká republika
http://linked.open...ontrolniKodProRIV	[9B291DCDDC4E]
http://linked.open...i/riv/nazevZdroje	BioResources
http://linked.open...in/vavai/riv/obor	JP
http://linked.open...ichTvurcuVysledku	1 (xsd:int)
http://linked.open...cetTvurcuVysledku	2 (xsd:int)
http://linked.open...UplatneniVysledku	2014
http://linked.open...v/svazekPeriodika	9
http://linked.open...iv/tvurceVysledku	Gaff, Milan Matlák, Jakub
http://linked.open...ain/vavai/riv/wos	000345396900108
issn	1930-2126
number of pages	11 (xsd:int)
http://localhost/t...ganizacniJednotka	41320

Faceted Search & Find service v1.16.118 as of Jun 21 2024

Alternative Linked Data Documents: ODE Content Formats:

RDF

ODATA

Microdata

About

OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 38 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software