Attributes | Values |
---|
rdf:type
| |
Description
| - This paper deals with splinter size analysis of beech wood, considering the angular tool of the cutter and also the physical and mechanical wood properties substantially influencing wood processing technology. Particle size analysis was conducted by sieving the samples using a set of laboratory sieves, with subsequent determination of the individual fraction shares. The results have been compared with respect to the possibility of wood waste separation and filtration, and its subsequent utilization, above all, in the production of agglomerated materials and production of wood briquettes and pellets. The most frequently occurring fractions in native beech samples range between 5 and 8 mm and between 2 and 5 mm, while powder fractions below 125 µm were found in less than 1% of investigated samples. The most frequently occurring fractions in thermally modified beech wood ranged from 0.5 to 1 mm, and the share of powder wood particles below 125 µm was less than 4%.
- This paper deals with splinter size analysis of beech wood, considering the angular tool of the cutter and also the physical and mechanical wood properties substantially influencing wood processing technology. Particle size analysis was conducted by sieving the samples using a set of laboratory sieves, with subsequent determination of the individual fraction shares. The results have been compared with respect to the possibility of wood waste separation and filtration, and its subsequent utilization, above all, in the production of agglomerated materials and production of wood briquettes and pellets. The most frequently occurring fractions in native beech samples range between 5 and 8 mm and between 2 and 5 mm, while powder fractions below 125 µm were found in less than 1% of investigated samples. The most frequently occurring fractions in thermally modified beech wood ranged from 0.5 to 1 mm, and the share of powder wood particles below 125 µm was less than 4%. (en)
|
Title
| - Effect of tool and milling parameters on the size distribution of splinters of planed native and thermally modified beech wood
- Effect of tool and milling parameters on the size distribution of splinters of planed native and thermally modified beech wood (en)
|
skos:prefLabel
| - Effect of tool and milling parameters on the size distribution of splinters of planed native and thermally modified beech wood
- Effect of tool and milling parameters on the size distribution of splinters of planed native and thermally modified beech wood (en)
|
skos:notation
| - RIV/60460709:41320/14:63140!RIV15-MSM-41320___
|
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| |
http://linked.open...iv/cisloPeriodika
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/60460709:41320/14:63140
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - plane milling, splinter size analysis, beech wood, thermoWood, cutting speed, feed speed, splinter size distribution (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...odStatuVydavatele
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...i/riv/nazevZdroje
| |
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...v/svazekPeriodika
| |
http://linked.open...iv/tvurceVysledku
| - Barcík, Štefan
- Gašparík, Miroslav
|
http://linked.open...ain/vavai/riv/wos
| |
issn
| |
number of pages
| |
http://localhost/t...ganizacniJednotka
| |