Attributes | Values |
---|
rdf:type
| |
Description
| - The publication deals with the influence of selected technological parameters (a feed speed and an abrasive mass flow rate) on dimension of water jet lagging during native wood cutting (Pedunculate Oak, European Beech, Norway Spruce) in the cutting process realized by abrasive water jet. The experiment proceeded within a range of usable values of the feed speed (0.2 – 0.6 m/min) and of the abrasive mass flow rate (250 – 450 g/min) and within basic models of the native wood cutting (that come from tangential and radial type of sawn wood and from two cutting directions along the grain and across the grain). The results refer to power potential of the abrasive water jet and its influence on the qualitative factors.
- The publication deals with the influence of selected technological parameters (a feed speed and an abrasive mass flow rate) on dimension of water jet lagging during native wood cutting (Pedunculate Oak, European Beech, Norway Spruce) in the cutting process realized by abrasive water jet. The experiment proceeded within a range of usable values of the feed speed (0.2 – 0.6 m/min) and of the abrasive mass flow rate (250 – 450 g/min) and within basic models of the native wood cutting (that come from tangential and radial type of sawn wood and from two cutting directions along the grain and across the grain). The results refer to power potential of the abrasive water jet and its influence on the qualitative factors. (en)
- The publication deals with the influence of selected technological parameters (a feed speed and an abrasive mass flow rate) on dimension of water jet lagging during native wood cutting (Pedunculate Oak, European Beech, Norway Spruce) in the cutting process realized by abrasive water jet. The experiment proceeded within a range of usable values of the feed speed (0.2 – 0.6 m/min) and of the abrasive mass flow rate (250 – 450 g/min) and within basic models of the native wood cutting (that come from tangential and radial type of sawn wood and from two cutting directions along the grain and across the grain). The results refer to power potential of the abrasive water jet and its influence on the qualitative factors. (cs)
|
Title
| - Influence of technological parameters on lagging size in cutting process of solid wood by abrasive water jet
- Influence of technological parameters on lagging size in cutting process of solid wood by abrasive water jet (en)
- Influence of technological parameters on lagging size in cutting process of solid wood by abrasive water jet (cs)
|
skos:prefLabel
| - Influence of technological parameters on lagging size in cutting process of solid wood by abrasive water jet
- Influence of technological parameters on lagging size in cutting process of solid wood by abrasive water jet (en)
- Influence of technological parameters on lagging size in cutting process of solid wood by abrasive water jet (cs)
|
skos:notation
| - RIV/60460709:41320/13:62544!RIV14-MSM-41320___
|
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| |
http://linked.open...iv/cisloPeriodika
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/60460709:41320/13:62544
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - abrasive water jet (AWJ), abrasive water jet lagging, feed speed, abrasive mass flow rate (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...odStatuVydavatele
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...i/riv/nazevZdroje
| |
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...v/svazekPeriodika
| |
http://linked.open...iv/tvurceVysledku
| - Barcík, Štefan
- Kvietková, Monika
- Kminiak, Richard
- Gašparík, Miroslav
|
http://linked.open...ain/vavai/riv/wos
| |
issn
| |
number of pages
| |
http://localhost/t...ganizacniJednotka
| |