About: The influence of incremental deformation of AHSS on stabilisation of retained austenite

Facets (new session)
Description
Metadata
Settings
- owl:sameAs
- Inference Rule:

About: The influence of incremental deformation of AHSS on stabilisation of retained austenite Goto Sponge NotDistinct Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

Attributes	Values
rdf:type	skos:Concept http://linked.opendata.cz/ontology/domain/vavai/Vysledek
Description	This paper describes the influence of incremental deformation on stabilization, morphology and amount of retained austenite in Q-P steel. The experiments were carried out on steel suitable for Q-P (Quenching and Partitioning) process with about 0.4% C and low-alloyed mainly by silicon, manganese and chromium. Several processing strategies were designed applying different amounts of incremental deformations during the second stage of Q-P process. The processing was done by thermo-mechanical simulator to ensure the exact control of deformation and temperature parameters. The steel was first austenized at 900-950°C. During the quenching incremental deformation was applied at a temperature interval of 900-820°C. Twenty, forty or sixty deformation steps were carried out with total logarithmic deformation equal to 5, 10.4 or 13.4 respectively. The steel was then further cooled to the temperature of about 200°C and subsequently annealed at different temperatures in the range of 250-350°C. Resulting microst This paper describes the influence of incremental deformation on stabilization, morphology and amount of retained austenite in Q-P steel. The experiments were carried out on steel suitable for Q-P (Quenching and Partitioning) process with about 0.4% C and low-alloyed mainly by silicon, manganese and chromium. Several processing strategies were designed applying different amounts of incremental deformations during the second stage of Q-P process. The processing was done by thermo-mechanical simulator to ensure the exact control of deformation and temperature parameters. The steel was first austenized at 900-950°C. During the quenching incremental deformation was applied at a temperature interval of 900-820°C. Twenty, forty or sixty deformation steps were carried out with total logarithmic deformation equal to 5, 10.4 or 13.4 respectively. The steel was then further cooled to the temperature of about 200°C and subsequently annealed at different temperatures in the range of 250-350°C. Resulting microst (en)
Title	The influence of incremental deformation of AHSS on stabilisation of retained austenite The influence of incremental deformation of AHSS on stabilisation of retained austenite (en)
skos:prefLabel	The influence of incremental deformation of AHSS on stabilisation of retained austenite The influence of incremental deformation of AHSS on stabilisation of retained austenite (en)
skos:notation	RIV/49777513:23210/10:00503533!RIV11-GA0-23210___
http://linked.open...avai/riv/aktivita	P
http://linked.open...avai/riv/aktivity	P(1M06032), P(GA106/09/1968)
http://linked.open...vai/riv/dodaniDat	2011
http://linked.open...aciTvurceVysledku	Klauberová, Danuše Mašek, Bohuslav Hauserová, Daniela Kučerová, Ludmila
http://linked.open.../riv/druhVysledku	D - Článek ve sborníku
http://linked.open...iv/duvernostUdaju	S - Úplné a pravdivé údaje nepodléhající ochraně podle zvláštních právních předpisů
http://linked.open...titaPredkladatele	Západočeská univerzita v Plzni / Fakulta strojní
http://linked.open...dnocenehoVysledku	263673
http://linked.open...ai/riv/idVysledku	RIV/49777513:23210/10:00503533
http://linked.open...riv/jazykVysledku	eng - angličtina
http://linked.open.../riv/klicovaSlova	Q-P Process; incremental deformation; retained austenite; AHSS; Ultra high strength steels (en)
http://linked.open.../riv/klicoveSlovo	AHSS incremental deformation retained austenite Ultra high strength steels Q-P Process
http://linked.open...ontrolniKodProRIV	[7F972237FE84]
http://linked.open...v/mistoKonaniAkce	Milano, Italy
http://linked.open...i/riv/mistoVydani	Milano
http://linked.open...i/riv/nazevZdroje	Super-High Strength Steels : 2nd International Conference Super-High Strength Steels
http://linked.open...in/vavai/riv/obor	JG
http://linked.open...ichTvurcuVysledku	4 (xsd:int)
http://linked.open...cetTvurcuVysledku	4 (xsd:int)
http://linked.open...vavai/riv/projekt	RESEARCH CENTRE OF FORMING TECHNOLOGY Development of New Grades of High-Strength Low-Alloyed Steels with Improved Elongation Values
http://linked.open...UplatneniVysledku	2010
http://linked.open...iv/tvurceVysledku	Hauserová, Daniela Kučerová, Ludmila Mašek, Bohuslav Klauberová, Danuše
http://linked.open...vavai/riv/typAkce	WRD - Světová
http://linked.open.../riv/zahajeniAkce	2010-10-17 (xsd:date)
number of pages	8 (xsd:int)
http://purl.org/ne...btex#hasPublisher	Associazione Italiana Di Metallurgia
https://schema.org/isbn	978-88-85298-79-8
http://localhost/t...ganizacniJednotka	23210

Faceted Search & Find service v1.16.118 as of Jun 21 2024

Alternative Linked Data Documents: ODE Content Formats:

RDF

ODATA

Microdata

About

OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 48 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software