Attributes | Values |
---|
rdf:type
| |
Description
| - One-side weld joint of W type was prepared from P92 type steel using GTAW & SMAW method. Creep test to the rupture of smooth cross-weld samples has been carried out at temperatures ranging from 575 to 650 °C and at stresses from 70 to 240 MPa. Fractographic analysis, hardness measurement and detailed study of submicrostructure have been performed using light, scanning and transmission electron microscopy. Changes of microstructure were correlated with the creep strength. Increase in size of secondary phases and cavities formation were evident after creep tests at temperatures above 575°C. Voids were concentrated in the fine prior austenite grain heat affected zones, where fracture occurred. In addition, a sporadic occurrence of individual cavities was found out in the base material and the weld metal after tests at 625 and 650 °C. During creep exposures at temperatures above 600 °C Laves phase precipitated.
- One-side weld joint of W type was prepared from P92 type steel using GTAW & SMAW method. Creep test to the rupture of smooth cross-weld samples has been carried out at temperatures ranging from 575 to 650 °C and at stresses from 70 to 240 MPa. Fractographic analysis, hardness measurement and detailed study of submicrostructure have been performed using light, scanning and transmission electron microscopy. Changes of microstructure were correlated with the creep strength. Increase in size of secondary phases and cavities formation were evident after creep tests at temperatures above 575°C. Voids were concentrated in the fine prior austenite grain heat affected zones, where fracture occurred. In addition, a sporadic occurrence of individual cavities was found out in the base material and the weld metal after tests at 625 and 650 °C. During creep exposures at temperatures above 600 °C Laves phase precipitated. (en)
|
Title
| - Creep properties and microstructure evoluation of weld joint of the pipe made of P92 steel
- Creep properties and microstructure evoluation of weld joint of the pipe made of P92 steel (en)
|
skos:prefLabel
| - Creep properties and microstructure evoluation of weld joint of the pipe made of P92 steel
- Creep properties and microstructure evoluation of weld joint of the pipe made of P92 steel (en)
|
skos:notation
| - RIV/47718684:_____/10:#0000433!RIV11-MSM-47718684
|
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/47718684:_____/10:#0000433
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - steel P 92, weldments, creep test, microstructure, TEM (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...v/mistoKonaniAkce
| |
http://linked.open...i/riv/mistoVydani
| |
http://linked.open...i/riv/nazevZdroje
| - Proc. of the 9th Liege conference Materials for advanced power engineering 2010
|
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...iv/tvurceVysledku
| - Jandová, Dagmar
- Kasl, Josef
- Folková, Eva
- Chvostová, Eva
|
http://linked.open...vavai/riv/typAkce
| |
http://linked.open.../riv/zahajeniAkce
| |
http://linked.open...n/vavai/riv/zamer
| |
issn
| |
number of pages
| |
http://purl.org/ne...btex#hasPublisher
| - Forschung Zentrum Julich GmbH
|
https://schema.org/isbn
| |