About: Stress Analysis of the Ceramics Heads with different Sizes under the Destruction Tests

Facets (new session)
Description
Metadata
Settings
- owl:sameAs
- Inference Rule:

About: Stress Analysis of the Ceramics Heads with different Sizes under the Destruction Tests Goto Sponge NotDistinct Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

Attributes	Values
rdf:type	skos:Concept http://linked.opendata.cz/ontology/domain/vavai/Vysledek
Description	The global solved problem is the calculation of the parameters of ceramic material from a set of destruction tests of ceramic heads of total hip joint endoprosthesis. The standard way of calculation of the material parameters consists in carrying out a set of 3 or 4 point bending tests of specimens cut out from parts of the ceramic material to be analysed. In case of ceramic heads, it is not possible to cut out specimens of required dimensions because the heads are too small (if the cut out specimens were smaller than the normalised ones, the material parameters derived from them would exhibit higher strength values than those which the given ceramic material really has). A special destruction device for heads destruction was designed and the solved local problem is the modification of this destructive device based on the analysis of tensile stress in the head for two different values of the depth of the conical hole in the head. The goal of device modification is a shift of the location with extreme The global solved problem is the calculation of the parameters of ceramic material from a set of destruction tests of ceramic heads of total hip joint endoprosthesis. The standard way of calculation of the material parameters consists in carrying out a set of 3 or 4 point bending tests of specimens cut out from parts of the ceramic material to be analysed. In case of ceramic heads, it is not possible to cut out specimens of required dimensions because the heads are too small (if the cut out specimens were smaller than the normalised ones, the material parameters derived from them would exhibit higher strength values than those which the given ceramic material really has). A special destruction device for heads destruction was designed and the solved local problem is the modification of this destructive device based on the analysis of tensile stress in the head for two different values of the depth of the conical hole in the head. The goal of device modification is a shift of the location with extreme (en)
Title	Stress Analysis of the Ceramics Heads with different Sizes under the Destruction Tests Stress Analysis of the Ceramics Heads with different Sizes under the Destruction Tests (en)
skos:prefLabel	Stress Analysis of the Ceramics Heads with different Sizes under the Destruction Tests Stress Analysis of the Ceramics Heads with different Sizes under the Destruction Tests (en)
skos:notation	RIV/00216305:26210/14:PU111772!RIV15-MSM-26210___
http://linked.open...avai/riv/aktivita	P
http://linked.open...avai/riv/aktivity	P(LO1202)
http://linked.open...iv/cisloPeriodika	12
http://linked.open...vai/riv/dodaniDat	2015
http://linked.open...aciTvurceVysledku	Janíček, Přemysl Návrat, Tomáš
http://linked.open.../riv/druhVysledku	J - Článek v odborném periodiku
http://linked.open...iv/duvernostUdaju	S - Úplné a pravdivé údaje nepodléhající ochraně podle zvláštních právních předpisů
http://linked.open...titaPredkladatele	Vysoké učení technické v Brně / Fakulta strojního inženýrství
http://linked.open...dnocenehoVysledku	47738
http://linked.open...ai/riv/idVysledku	RIV/00216305:26210/14:PU111772
http://linked.open...riv/jazykVysledku	eng - angličtina
http://linked.open.../riv/klicovaSlova	ceramic heads, depth of the conical hole, destruction test, material parameters, principal stress, total hip joint endoprosthesis (en)
http://linked.open.../riv/klicoveSlovo	material parameters principal stress ceramic heads depth of the conical hole destruction test total hip joint endoprosthesis
http://linked.open...odStatuVydavatele	TR - Turecká republika
http://linked.open...ontrolniKodProRIV	[79B9D6CB9BF7]
http://linked.open...i/riv/nazevZdroje	World Academy of Science, Engineering and Technology
http://linked.open...in/vavai/riv/obor	JH
http://linked.open...ichTvurcuVysledku	2 (xsd:int)
http://linked.open...cetTvurcuVysledku	3 (xsd:int)
http://linked.open...vavai/riv/projekt	NETME CENTRE PLUS
http://linked.open...UplatneniVysledku	2014
http://linked.open...v/svazekPeriodika	8
http://linked.open...iv/tvurceVysledku	Fuis, Vladimír Janíček, Přemysl Návrat, Tomáš
issn	1307-6892
number of pages	5 (xsd:int)
http://localhost/t...ganizacniJednotka	26210

Faceted Search & Find service v1.16.118 as of Jun 21 2024

Alternative Linked Data Documents: ODE Content Formats:

RDF

ODATA

Microdata

About

OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 58 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software