About: Investigation on capability of the reaming process using minimal quantity lubrication

Facets (new session)
Description
Metadata
Settings
- owl:sameAs
- Inference Rule:

About: Investigation on capability of the reaming process using minimal quantity lubrication Goto Sponge NotDistinct Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

Attributes	Values
rdf:type	skos:Concept http://linked.opendata.cz/ontology/domain/vavai/Vysledek
Description	An investigation on reaming using minimal quantity lubrication (MQL) was carried out with the scope of documenting process capability using a metrological approach. Reaming tests were carried out on austenitic stainless steel, using HSS reamers with different cutting data and lubrication conditions. The reaming operations were compared with respect to a number of evaluation parameters, both hole quality (diameter, roundness, cylindricity and surface roughness) and cutting forces (reaming thrust and torque). Absolute average values as well as experimental standard deviations of the evaluation parameters were calculated, and uncertainty budgeting was performed for all measurands. Results show that reaming operations at lower cutting speed and feed produce low process scatter. The use of smaller depth of cut (i.e. smaller reamer diameter) resulted in larger reaming torque scatter than when a larger depth of cut was employed. The suitability of MQL for reaming was proven under the investigated process con An investigation on reaming using minimal quantity lubrication (MQL) was carried out with the scope of documenting process capability using a metrological approach. Reaming tests were carried out on austenitic stainless steel, using HSS reamers with different cutting data and lubrication conditions. The reaming operations were compared with respect to a number of evaluation parameters, both hole quality (diameter, roundness, cylindricity and surface roughness) and cutting forces (reaming thrust and torque). Absolute average values as well as experimental standard deviations of the evaluation parameters were calculated, and uncertainty budgeting was performed for all measurands. Results show that reaming operations at lower cutting speed and feed produce low process scatter. The use of smaller depth of cut (i.e. smaller reamer diameter) resulted in larger reaming torque scatter than when a larger depth of cut was employed. The suitability of MQL for reaming was proven under the investigated process con (en)
Title	Investigation on capability of the reaming process using minimal quantity lubrication Investigation on capability of the reaming process using minimal quantity lubrication (en)
skos:prefLabel	Investigation on capability of the reaming process using minimal quantity lubrication Investigation on capability of the reaming process using minimal quantity lubrication (en)
skos:notation	RIV/00216305:26210/09:PU83178!RIV10-MSM-26210___
http://linked.open...avai/riv/aktivita	S
http://linked.open...avai/riv/aktivity	S
http://linked.open...iv/cisloPeriodika	1
http://linked.open...vai/riv/dodaniDat	2010
http://linked.open...aciTvurceVysledku	Píška, Miroslav
http://linked.open.../riv/druhVysledku	J - Článek v odborném periodiku
http://linked.open...iv/duvernostUdaju	S - Úplné a pravdivé údaje nepodléhající ochraně podle zvláštních právních předpisů
http://linked.open...titaPredkladatele	Vysoké učení technické v Brně / Fakulta strojního inženýrství
http://linked.open...dnocenehoVysledku	320347
http://linked.open...ai/riv/idVysledku	RIV/00216305:26210/09:PU83178
http://linked.open...riv/jazykVysledku	eng - angličtina
http://linked.open.../riv/klicovaSlova	Reaming, Minimal quantity lubrication, Measuring uncertainty, Cutting forces, Dimensional and geometrical measurement, Surface roughness (en)
http://linked.open.../riv/klicoveSlovo	Cutting forces Reaming Dimensional and geometrical measurement Measuring uncertainty Minimal quantity lubrication Surface roughness
http://linked.open...odStatuVydavatele	FR - Francouzská republika
http://linked.open...ontrolniKodProRIV	[E8850D039010]
http://linked.open...i/riv/nazevZdroje	CIRP Journal of Manufacturing Science and Technology
http://linked.open...in/vavai/riv/obor	JQ
http://linked.open...ichTvurcuVysledku	1 (xsd:int)
http://linked.open...cetTvurcuVysledku	4 (xsd:int)
http://linked.open...UplatneniVysledku	2009
http://linked.open...v/svazekPeriodika	2
http://linked.open...iv/tvurceVysledku	DeChiffre, Leonardo Píška, Miroslav Muller, Pavel Tosello, Guido
issn	1755-5817
number of pages	8 (xsd:int)
http://localhost/t...ganizacniJednotka	26210

Faceted Search & Find service v1.16.118 as of Jun 21 2024

Alternative Linked Data Documents: ODE Content Formats:

RDF

ODATA

Microdata

About

OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 77 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software