About: The Optimization of the Isothermal Transformation Dwell with Emphasis on the Matrix Structural Mixture of Austempered Ductile Iron     Goto   Sponge   NotDistinct   Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

AttributesValues
rdf:type
Description
  • Studovaná ADI byla získána tepelným zpracováním nelegované litiny s kuličkovým grafitem. Tepelné zpracování sestávalo z austenitizace (900 C / 1h), izotermické transformace pri teplotě 380 C a ochlazení do vody. Ke studiu změn struktury v průběhu izotermické transformace byly vybrány doby transformace v rozsahu od 2 do 540 minut. (cs)
  • The studied austempered ductile iron (ADI) was obtained by the heat treatment of an unalloyed nodular cast iron consisting of austenitization (900 C / 1h), an isothermal transformation at 380 C and water cooling at the end. To study matrix composition changes during the isothermal transformation, the dwell at the transformation temperature was chosen in very wide range of 2 min to 540 min. The isothermal transformation starts by a creation of bainitic ferrite needles resulting in an enrichment of the non-transformed austenite by carbon which increases its stability. For short dwells (2, 5 and 10 min) the stabilization of the austenite is not sufficient yet, therefore the partial martensitic transformation during cooling occurs. With increasing dwell the amount of the stabilized austenite increases and reaches its maximum for the transformation dwell of 60 min. With further dwell lengthening the amount of the stabilized austenite decreases again as a consequence of its continuing transformation into th
  • The studied austempered ductile iron (ADI) was obtained by the heat treatment of an unalloyed nodular cast iron consisting of austenitization (900 C / 1h), an isothermal transformation at 380 C and water cooling at the end. To study matrix composition changes during the isothermal transformation, the dwell at the transformation temperature was chosen in very wide range of 2 min to 540 min. The isothermal transformation starts by a creation of bainitic ferrite needles resulting in an enrichment of the non-transformed austenite by carbon which increases its stability. For short dwells (2, 5 and 10 min) the stabilization of the austenite is not sufficient yet, therefore the partial martensitic transformation during cooling occurs. With increasing dwell the amount of the stabilized austenite increases and reaches its maximum for the transformation dwell of 60 min. With further dwell lengthening the amount of the stabilized austenite decreases again as a consequence of its continuing transformation into th (en)
Title
  • The Optimization of the Isothermal Transformation Dwell with Emphasis on the Matrix Structural Mixture of Austempered Ductile Iron
  • The Optimization of the Isothermal Transformation Dwell with Emphasis on the Matrix Structural Mixture of Austempered Ductile Iron (en)
  • Optimalizace izotermické prodlevy s důrazem na strukturu ADI (cs)
skos:prefLabel
  • The Optimization of the Isothermal Transformation Dwell with Emphasis on the Matrix Structural Mixture of Austempered Ductile Iron
  • The Optimization of the Isothermal Transformation Dwell with Emphasis on the Matrix Structural Mixture of Austempered Ductile Iron (en)
  • Optimalizace izotermické prodlevy s důrazem na strukturu ADI (cs)
skos:notation
  • RIV/00216305:26210/07:PU73579!RIV08-GA0-26210___
http://linked.open.../vavai/riv/strany
  • 113-116
http://linked.open...avai/riv/aktivita
http://linked.open...avai/riv/aktivity
  • P(GA106/03/1265), Z(MO0FVT0000404)
http://linked.open...iv/cisloPeriodika
  • 2/2007
http://linked.open...vai/riv/dodaniDat
http://linked.open...aciTvurceVysledku
http://linked.open.../riv/druhVysledku
http://linked.open...iv/duvernostUdaju
http://linked.open...titaPredkladatele
http://linked.open...dnocenehoVysledku
  • 439906
http://linked.open...ai/riv/idVysledku
  • RIV/00216305:26210/07:PU73579
http://linked.open...riv/jazykVysledku
http://linked.open.../riv/klicovaSlova
  • ADI, stabilized austenite, transformation dwell, isothermal transformation stage (en)
http://linked.open.../riv/klicoveSlovo
http://linked.open...odStatuVydavatele
  • LT - Litevská republika
http://linked.open...ontrolniKodProRIV
  • [97EC3F2836FD]
http://linked.open...i/riv/nazevZdroje
  • Materials Science
http://linked.open...in/vavai/riv/obor
http://linked.open...ichTvurcuVysledku
http://linked.open...cetTvurcuVysledku
http://linked.open...vavai/riv/projekt
http://linked.open...UplatneniVysledku
http://linked.open...v/svazekPeriodika
  • 13
http://linked.open...iv/tvurceVysledku
  • Kohout, Jan
  • Věchet, Stanislav
  • Hanzlíková, Klára
http://linked.open...n/vavai/riv/zamer
issn
  • 1392-1320
number of pages
http://localhost/t...ganizacniJednotka
  • 26210
Faceted Search & Find service v1.16.118 as of Jun 21 2024


Alternative Linked Data Documents: ODE     Content Formats:   [cxml] [csv]     RDF   [text] [turtle] [ld+json] [rdf+json] [rdf+xml]     ODATA   [atom+xml] [odata+json]     Microdata   [microdata+json] [html]    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 77 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software