About: Activation Energy in Hot Forming of Selected Fe-40at.%Al Type Intermetallic Compounds     Goto   Sponge   NotDistinct   Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

AttributesValues
rdf:type
Description
  • Promising potential of the Fe-40at.%Al type alloys is used only in a limited way as yet, mainly due to their high brittleness. With regard to attraction of the given type material, the plastometric research at temperatures 800 degrees C to 1200 degrees C was carried out as a basic one, namely using the uniaxial compression tests at strain rates 10(-2) s(-1) to 10(1) s(-1). Cylindrical samples were manufactured from laboratory castings, gained by means of the vacuum induction furnace. Two materials were tested - Fe-40Al and Fe-40Al+TiB2. From the measured flow stress curves the values of maximum stress were obtained and used for determination of the activation energy in hot forming according to the classical equation of the hyperbolic sine type. Enumeration of its parameters led to a possibility to predict maximum deformation resistance values of the investigated alloys in dependence on temperature and strain rate. Pronounced effect of the added titanium diboride particles (< 10 mu m) on the activation energy value and to a resistance to the formation of cracks was observed. Thanks to the obtained value of activation energy an equation sufficiently describing the initiation of dynamic recrystallization process in the Fe-40Al+TiB2 material as a function of the Zener-Hollomon parameter could be derived.
  • Promising potential of the Fe-40at.%Al type alloys is used only in a limited way as yet, mainly due to their high brittleness. With regard to attraction of the given type material, the plastometric research at temperatures 800 degrees C to 1200 degrees C was carried out as a basic one, namely using the uniaxial compression tests at strain rates 10(-2) s(-1) to 10(1) s(-1). Cylindrical samples were manufactured from laboratory castings, gained by means of the vacuum induction furnace. Two materials were tested - Fe-40Al and Fe-40Al+TiB2. From the measured flow stress curves the values of maximum stress were obtained and used for determination of the activation energy in hot forming according to the classical equation of the hyperbolic sine type. Enumeration of its parameters led to a possibility to predict maximum deformation resistance values of the investigated alloys in dependence on temperature and strain rate. Pronounced effect of the added titanium diboride particles (< 10 mu m) on the activation energy value and to a resistance to the formation of cracks was observed. Thanks to the obtained value of activation energy an equation sufficiently describing the initiation of dynamic recrystallization process in the Fe-40Al+TiB2 material as a function of the Zener-Hollomon parameter could be derived. (en)
Title
  • Activation Energy in Hot Forming of Selected Fe-40at.%Al Type Intermetallic Compounds
  • Activation Energy in Hot Forming of Selected Fe-40at.%Al Type Intermetallic Compounds (en)
skos:prefLabel
  • Activation Energy in Hot Forming of Selected Fe-40at.%Al Type Intermetallic Compounds
  • Activation Energy in Hot Forming of Selected Fe-40at.%Al Type Intermetallic Compounds (en)
skos:notation
  • RIV/00216208:11320/12:10130997!RIV13-GA0-11320___
http://linked.open...avai/riv/aktivita
http://linked.open...avai/riv/aktivity
  • P(ED0040/01/01), P(GAP107/10/0438), Z(MSM6198910015)
http://linked.open...iv/cisloPeriodika
  • 3
http://linked.open...vai/riv/dodaniDat
http://linked.open...aciTvurceVysledku
http://linked.open.../riv/druhVysledku
http://linked.open...iv/duvernostUdaju
http://linked.open...titaPredkladatele
http://linked.open...dnocenehoVysledku
  • 120943
http://linked.open...ai/riv/idVysledku
  • RIV/00216208:11320/12:10130997
http://linked.open...riv/jazykVysledku
http://linked.open.../riv/klicovaSlova
  • flow; steel; deformation; superplasticity; alloys (en)
http://linked.open.../riv/klicoveSlovo
http://linked.open...odStatuVydavatele
  • PL - Polská republika
http://linked.open...ontrolniKodProRIV
  • [E1C25F020FF9]
http://linked.open...i/riv/nazevZdroje
  • Acta Physica Polonica A
http://linked.open...in/vavai/riv/obor
http://linked.open...ichTvurcuVysledku
http://linked.open...cetTvurcuVysledku
http://linked.open...vavai/riv/projekt
http://linked.open...UplatneniVysledku
http://linked.open...v/svazekPeriodika
  • 122
http://linked.open...iv/tvurceVysledku
  • Kratochvíl, Petr
  • Šíma, Vladimír
  • Kawulok, R.
  • Knapinski, M.
  • Kulveitova, H.
  • Schindler, I.
http://linked.open...ain/vavai/riv/wos
  • 000309019200046
http://linked.open...n/vavai/riv/zamer
issn
  • 0587-4246
number of pages
http://localhost/t...ganizacniJednotka
  • 11320
Faceted Search & Find service v1.16.118 as of Jun 21 2024


Alternative Linked Data Documents: ODE     Content Formats:   [cxml] [csv]     RDF   [text] [turtle] [ld+json] [rdf+json] [rdf+xml]     ODATA   [atom+xml] [odata+json]     Microdata   [microdata+json] [html]    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 48 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software