About: Effect of Incremental Forming Parameters on Titanium Alloys Properties

Facets (new session)
Description
Metadata
Settings
- owl:sameAs
- Inference Rule:

About: Effect of Incremental Forming Parameters on Titanium Alloys Properties Goto Sponge NotDistinct Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

Attributes	Values
rdf:type	skos:Concept http://linked.opendata.cz/ontology/domain/vavai/Vysledek
rdfs:seeAlso	http://waset.org/publications/9997200/effect-of-incremental-forming-parameters-on-titanium-alloys-properties
Description	Shear spinning is closely related to the asymmetric incremental sheet forming (AISF) that could significantly reduce costs incurred by the fabrication of complex aeronautical components with a minimal environmental impact. The spinning experiments were carried out on commercially pure titanium (Ti-Gr2) and Ti-6Al-4V (Ti-Gr5) alloy. Three forming modes were used to characterize the titanium alloys properties from the point of view of different spinning parameters. The structure and properties of the materials were assessed by means of metallographic analyses and microhardness measurements. The highest value wall angle failure limit was achieved using spinning parameters mode for both materials. The feed rate effect was observed only in the samples from the Ti-Gr2 material, when a refinement of the grain microstructure with lower feed rate and higher tangential speed occurred. Ti-Gr5 alloy exhibited a decrease of the microhardness at higher straining due to recovery processes. Shear spinning is closely related to the asymmetric incremental sheet forming (AISF) that could significantly reduce costs incurred by the fabrication of complex aeronautical components with a minimal environmental impact. The spinning experiments were carried out on commercially pure titanium (Ti-Gr2) and Ti-6Al-4V (Ti-Gr5) alloy. Three forming modes were used to characterize the titanium alloys properties from the point of view of different spinning parameters. The structure and properties of the materials were assessed by means of metallographic analyses and microhardness measurements. The highest value wall angle failure limit was achieved using spinning parameters mode for both materials. The feed rate effect was observed only in the samples from the Ti-Gr2 material, when a refinement of the grain microstructure with lower feed rate and higher tangential speed occurred. Ti-Gr5 alloy exhibited a decrease of the microhardness at higher straining due to recovery processes. (en)
Title	Effect of Incremental Forming Parameters on Titanium Alloys Properties Effect of Incremental Forming Parameters on Titanium Alloys Properties (en)
skos:prefLabel	Effect of Incremental Forming Parameters on Titanium Alloys Properties Effect of Incremental Forming Parameters on Titanium Alloys Properties (en)
skos:notation	RIV/00010669:_____/14:#0001674!RIV15-MSM-00010669
http://linked.open...avai/riv/aktivita	P
http://linked.open...avai/riv/aktivity	P(7E11007)
http://linked.open...iv/cisloPeriodika	1
http://linked.open...vai/riv/dodaniDat	2015
http://linked.open...aciTvurceVysledku	Homola, Petr Kafka, Václav Nováková, Lucie
http://linked.open.../riv/druhVysledku	J - Článek v odborném periodiku
http://linked.open...iv/duvernostUdaju	S - Úplné a pravdivé údaje nepodléhající ochraně podle zvláštních právních předpisů
http://linked.open...titaPredkladatele	Výzkumný a zkušební letecký ústav, a.s.
http://linked.open...dnocenehoVysledku	13350
http://linked.open...ai/riv/idVysledku	RIV/00010669:_____/14:#0001674
http://linked.open...riv/jazykVysledku	eng - angličtina
http://linked.open.../riv/klicovaSlova	Incremental forming; metallography; shear spinning; titanium alloys (en)
http://linked.open.../riv/klicoveSlovo	Incremental forming shear spinning metallography titanium alloys
http://linked.open...odStatuVydavatele	US - Spojené státy americké
http://linked.open...ontrolniKodProRIV	[D4A80E3677C8]
http://linked.open...i/riv/nazevZdroje	International Journal of Chemical, Nuclear, Metallurgical and Materials Engineering
http://linked.open...in/vavai/riv/obor	JG
http://linked.open...ichTvurcuVysledku	3 (xsd:int)
http://linked.open...cetTvurcuVysledku	4 (xsd:int)
http://linked.open...vavai/riv/projekt	Innovative Manufacturing of complex Ti sheet aeronautical components
http://linked.open...UplatneniVysledku	2014
http://linked.open...v/svazekPeriodika	8
http://linked.open...iv/tvurceVysledku	Nováková, Lucie Homola, Petr Kafka, Václav P. Oscoz, Mariluz
issn	1307-6892
number of pages	5 (xsd:int)

Faceted Search & Find service v1.16.118 as of Jun 21 2024

Alternative Linked Data Documents: ODE Content Formats:

RDF

ODATA

Microdata

About

OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 48 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software