About: Recyclation of Irradiated HDPE - Influence on Tensile Toughness

Facets (new session)
Description
Metadata
Settings
- owl:sameAs
- Inference Rule:

About: Recyclation of Irradiated HDPE - Influence on Tensile Toughness Goto Sponge NotDistinct Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

Attributes	Values
rdf:type	skos:Concept http://linked.opendata.cz/ontology/domain/vavai/Vysledek
Description	Although irradiation of plastics is a well-recognized modification, little research has been undertaken on the possible re-use of such modified materials. In this research paper their possible utilization as fillers into non-irradiated materials is investigated. A powder of recycled irradiated high-density polyethylene (HDPE) was used as filler and granules of non-irradiated neat low-density polyethylene (LDPE) were used as a polymer matrix. Both materials were mixed together in seven concentrations (from 0 % to 60 % of the filler) and test specimens were prepared from the resulting compound by an injection molding technology. Tensile test at two temperatures (ambient – 23 °C and elevated – 80 °C ) was performed and influence of the filler on strength and toughness was observed. According to measured results there is significant growth of both, strength (up to 41 %) and toughness (up to 85 %), similar trend is observed at elevated temperature as well. These findings indicate that it is possible to re-use irradiated polymer material after the end of its service life, while taking advantage of the improvement in the resulting mechanical properties Although irradiation of plastics is a well-recognized modification, little research has been undertaken on the possible re-use of such modified materials. In this research paper their possible utilization as fillers into non-irradiated materials is investigated. A powder of recycled irradiated high-density polyethylene (HDPE) was used as filler and granules of non-irradiated neat low-density polyethylene (LDPE) were used as a polymer matrix. Both materials were mixed together in seven concentrations (from 0 % to 60 % of the filler) and test specimens were prepared from the resulting compound by an injection molding technology. Tensile test at two temperatures (ambient – 23 °C and elevated – 80 °C ) was performed and influence of the filler on strength and toughness was observed. According to measured results there is significant growth of both, strength (up to 41 %) and toughness (up to 85 %), similar trend is observed at elevated temperature as well. These findings indicate that it is possible to re-use irradiated polymer material after the end of its service life, while taking advantage of the improvement in the resulting mechanical properties (en)
Title	Recyclation of Irradiated HDPE - Influence on Tensile Toughness Recyclation of Irradiated HDPE - Influence on Tensile Toughness (en)
skos:prefLabel	Recyclation of Irradiated HDPE - Influence on Tensile Toughness Recyclation of Irradiated HDPE - Influence on Tensile Toughness (en)
skos:notation	RIV/70883521:28110/13:43869944!RIV14-MSM-28110___
http://linked.open...avai/predkladatel	Fakulta technologická
http://linked.open...avai/riv/aktivita	P S
http://linked.open...avai/riv/aktivity	P(ED2.1.00/03.0089), S
http://linked.open...vai/riv/dodaniDat	2014
http://linked.open...aciTvurceVysledku	Kyas, Kamil Škrobák, Adam Navrátil, Jan
http://linked.open.../riv/druhVysledku	D - Článek ve sborníku
http://linked.open...iv/duvernostUdaju	S - Úplné a pravdivé údaje nepodléhající ochraně podle zvláštních právních předpisů
http://linked.open...titaPredkladatele	Univerzita Tomáše Bati ve Zlíně / Fakulta technologická
http://linked.open...dnocenehoVysledku	101803
http://linked.open...ai/riv/idVysledku	RIV/70883521:28110/13:43869944
http://linked.open...riv/jazykVysledku	eng - angličtina
http://linked.open.../riv/klicovaSlova	Radiation Crosslinking, Tensile Test, Recyclation, HDPE, LDPE (en)
http://linked.open.../riv/klicoveSlovo	HDPE LDPE Radiation Crosslinking Recyclation Tensile Test
http://linked.open...ontrolniKodProRIV	[02A3A1C5C343]
http://linked.open...v/mistoKonaniAkce	Rhodos
http://linked.open...i/riv/mistoVydani	Rhodes
http://linked.open...i/riv/nazevZdroje	Recent Advances in Systems Science Proceedings of the 17th International Conference on Systems (part of CSCC´13)
http://linked.open...in/vavai/riv/obor	JP
http://linked.open...ichTvurcuVysledku	3 (xsd:int)
http://linked.open...cetTvurcuVysledku	7 (xsd:int)
http://linked.open...vavai/riv/projekt	The Centre of Security, Information and Advanced Technologies (CEBIA-Tech)
http://linked.open...UplatneniVysledku	2013
http://linked.open...iv/tvurceVysledku	Maňas, David Maňas, Miroslav Navrátil, Jan Staněk, Michal Kyas, Kamil Šenkeřík, Vojtěch Škrobák, Adam
http://linked.open...vavai/riv/typAkce	WRD - Světová
http://linked.open.../riv/zahajeniAkce	2013-07-16 (xsd:date)
issn	1790-5117
number of pages	4 (xsd:int)
http://purl.org/ne...btex#hasPublisher	WSEAS Press (GR)
https://schema.org/isbn	978-960-474-314-8
http://localhost/t...ganizacniJednotka	28110

Faceted Search & Find service v1.16.118 as of Jun 21 2024

Alternative Linked Data Documents: ODE Content Formats:

RDF

ODATA

Microdata

About

OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 85 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software