About: Comparison of mechanical properties of arc melted and power metallurgy processed biocompatible alloy

Facets (new session)
Description
Metadata
Settings
- owl:sameAs
- Inference Rule:

About: Comparison of mechanical properties of arc melted and power metallurgy processed biocompatible alloy Goto Sponge NotDistinct Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

Attributes	Values
rdf:type	skos:Concept http://linked.opendata.cz/ontology/domain/vavai/Vysledek
rdfs:seeAlso	http://www.metal2012.com/files/proceedings/metal_11/lists/papers/761.pdf
Description	Materials for bioimplants became more demanding last days, because of increasing number operations and longer life span. Because of that the requirements on the properties of these materials also increases. One of the most promising group of materials for these applications seems to be the beta titanium alloys. Processing of these alloys via arc melting is quite difficult and expensive. That is the reason why the possibilities of other ways of preparation, like powder metallurgy, are studied. In this paper, the influence of cold isostatic pressing (CIP) preparation parameters on biocompatible Ti-Nb alloy properties, were studied. There were used powders with various particle sizes and different sintering parameters and the resulting porosity, chemical and structural homogeneity were observed. Subsequent removing of residual porosity during hot forging was tested on the specimens. After solution treatment alloys were cold swaged and final heat treatment was carried out. Mechanical properties of the final products were measured by tensile tests. The goal of this paper was to determine parameters of final product processing via powder metallurgy so as to obtain material with similar or better properties as materials prepared through arc melting. Materials for bioimplants became more demanding last days, because of increasing number operations and longer life span. Because of that the requirements on the properties of these materials also increases. One of the most promising group of materials for these applications seems to be the beta titanium alloys. Processing of these alloys via arc melting is quite difficult and expensive. That is the reason why the possibilities of other ways of preparation, like powder metallurgy, are studied. In this paper, the influence of cold isostatic pressing (CIP) preparation parameters on biocompatible Ti-Nb alloy properties, were studied. There were used powders with various particle sizes and different sintering parameters and the resulting porosity, chemical and structural homogeneity were observed. Subsequent removing of residual porosity during hot forging was tested on the specimens. After solution treatment alloys were cold swaged and final heat treatment was carried out. Mechanical properties of the final products were measured by tensile tests. The goal of this paper was to determine parameters of final product processing via powder metallurgy so as to obtain material with similar or better properties as materials prepared through arc melting. (en)
Title	Comparison of mechanical properties of arc melted and power metallurgy processed biocompatible alloy Comparison of mechanical properties of arc melted and power metallurgy processed biocompatible alloy (en)
skos:prefLabel	Comparison of mechanical properties of arc melted and power metallurgy processed biocompatible alloy Comparison of mechanical properties of arc melted and power metallurgy processed biocompatible alloy (en)
skos:notation	RIV/60193247:_____/11:UJP1463C!RIV12-MPO-60193247
http://linked.open...avai/predkladatel	UJP PRAHA a.s.
http://linked.open...avai/riv/aktivita	P
http://linked.open...avai/riv/aktivity	P(2A-2TP1/073)
http://linked.open...vai/riv/dodaniDat	2012
http://linked.open...aciTvurceVysledku	Hnilica, František Málek, Jaroslav Veselý, Jaroslav
http://linked.open.../riv/druhVysledku	D - Článek ve sborníku
http://linked.open...iv/duvernostUdaju	S - Úplné a pravdivé údaje nepodléhající ochraně podle zvláštních právních předpisů
http://linked.open...titaPredkladatele	UJP PRAHA a.s.
http://linked.open...dnocenehoVysledku	191172
http://linked.open...ai/riv/idVysledku	RIV/60193247:_____/11:UJP1463C
http://linked.open...riv/jazykVysledku	eng - angličtina
http://linked.open.../riv/klicovaSlova	powder metallurgy, beta titanium alloys, porosity, hot forging (en)
http://linked.open.../riv/klicoveSlovo	beta titanium alloys hot forging porosity powder metallurgy
http://linked.open...ontrolniKodProRIV	[8767A75DD1EC]
http://linked.open...v/mistoKonaniAkce	Brno
http://linked.open...i/riv/mistoVydani	Ostrava
http://linked.open...i/riv/nazevZdroje	METAL 2011, CONFERENCE PROCEEDINGS
http://linked.open...in/vavai/riv/obor	JG
http://linked.open...ichTvurcuVysledku	3 (xsd:int)
http://linked.open...cetTvurcuVysledku	3 (xsd:int)
http://linked.open...vavai/riv/projekt	Research of Material and Utility Properties of Modern Highalloyed stable Beta Titanium Alloys and Development of Technology Pheir Production by Power Metallurgy.
http://linked.open...UplatneniVysledku	2011
http://linked.open...iv/tvurceVysledku	Hnilica, František Málek, Jaroslav Veselý, Jaroslav
http://linked.open...vavai/riv/typAkce	WRD - Světová
http://linked.open.../riv/zahajeniAkce	2011-05-18 (xsd:date)
number of pages	6 (xsd:int)
http://purl.org/ne...btex#hasPublisher	TANGER, spol. s r.o.
https://schema.org/isbn	978-80-87294-17-8

Faceted Search & Find service v1.16.118 as of Jun 21 2024

Alternative Linked Data Documents: ODE Content Formats:

RDF

ODATA

Microdata

About

OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 27 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software