About: On Formability of MoNiCr Alloy

Facets (new session)
Description
Metadata
Settings
- owl:sameAs
- Inference Rule:

About: On Formability of MoNiCr Alloy Goto Sponge NotDistinct Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

Attributes	Values
rdf:type	skos:Concept http://linked.opendata.cz/ontology/domain/vavai/Vysledek
Description	The paper deals with recrystallization conditions monitoring for MoNiCr nickel superalloy. The alloy is determined for modern concepts of nuclear reactors in which molten fluoride salts are used in the primary and/or secondary circuit as coolants. It represents a material with high corrosion resistance against fluoride salts and it has very good creep properties in the temperature range of interest for such a kind of reactors between 650 – 800 °C as well. The manufacture of vessels and fittings from MoNiCr alloy requires appropriate forming technology for this high-alloyed material. The key moment seems to be forming of the material cast state to the state of cast recrystallized microstructure with a homogenous fine grains. A kind of stress condition is besides temperature very important in the course of a hot forming of this type of hardly deformable materials. Forming with prevailing pressure state of stress increases probability that material can attain level of deformation allowing recovery and recrystallization processes without the material failure. Preceding cold deformation can essentially accelerate the recrystallization process. Investigation of forming condition influence on MoNiCr microstructure and thus its formability is performed here. The paper deals with recrystallization conditions monitoring for MoNiCr nickel superalloy. The alloy is determined for modern concepts of nuclear reactors in which molten fluoride salts are used in the primary and/or secondary circuit as coolants. It represents a material with high corrosion resistance against fluoride salts and it has very good creep properties in the temperature range of interest for such a kind of reactors between 650 – 800 °C as well. The manufacture of vessels and fittings from MoNiCr alloy requires appropriate forming technology for this high-alloyed material. The key moment seems to be forming of the material cast state to the state of cast recrystallized microstructure with a homogenous fine grains. A kind of stress condition is besides temperature very important in the course of a hot forming of this type of hardly deformable materials. Forming with prevailing pressure state of stress increases probability that material can attain level of deformation allowing recovery and recrystallization processes without the material failure. Preceding cold deformation can essentially accelerate the recrystallization process. Investigation of forming condition influence on MoNiCr microstructure and thus its formability is performed here. (en)
Title	On Formability of MoNiCr Alloy On Formability of MoNiCr Alloy (en)
skos:prefLabel	On Formability of MoNiCr Alloy On Formability of MoNiCr Alloy (en)
skos:notation	RIV/26316919:_____/11:#0000310!RIV12-TA0-26316919
http://linked.open...avai/predkladatel	COMTES FHT a.s.
http://linked.open...avai/riv/aktivita	P
http://linked.open...avai/riv/aktivity	P(TA01020985)
http://linked.open...iv/cisloPeriodika	295-297
http://linked.open...vai/riv/dodaniDat	2012
http://linked.open...aciTvurceVysledku	Dlouhý, Jaromír Nový, Zbyšek Džugan, Ján Podaný, Pavel Motyčka, Petr
http://linked.open.../riv/druhVysledku	J - Článek v odborném periodiku
http://linked.open...iv/duvernostUdaju	S - Úplné a pravdivé údaje nepodléhající ochraně podle zvláštních právních předpisů
http://linked.open...titaPredkladatele	COMTES FHT a.s.
http://linked.open...dnocenehoVysledku	218022
http://linked.open...ai/riv/idVysledku	RIV/26316919:_____/11:#0000310
http://linked.open...riv/jazykVysledku	eng - angličtina
http://linked.open.../riv/klicovaSlova	Ni-alloys, high temperature application, thermo-mechanical treatment (en)
http://linked.open.../riv/klicoveSlovo	Ni-alloys high temperature application thermo-mechanical treatment
http://linked.open...odStatuVydavatele	CH - Švýcarská konfederace
http://linked.open...ontrolniKodProRIV	[AECCB8A71422]
http://linked.open...i/riv/nazevZdroje	Advanced Materials Research
http://linked.open...in/vavai/riv/obor	JP
http://linked.open...ichTvurcuVysledku	5 (xsd:int)
http://linked.open...cetTvurcuVysledku	5 (xsd:int)
http://linked.open...vavai/riv/projekt	The development and modernization of blade attachments of steam turbines for theirs reliability and lifetime increase.
http://linked.open...UplatneniVysledku	2011
http://linked.open...v/svazekPeriodika	2011
http://linked.open...iv/tvurceVysledku	Dlouhý, Jaromír Nový, Zbyšek Džugan, Ján Podaný, Pavel Motyčka, Petr
issn	1662-8985
number of pages	7 (xsd:int)
http://bibframe.org/vocab/doi	10.4028/www.scientific.net/AMR.295-297.1731
is http://linked.open...avai/riv/vysledek of	On Formability of MoNiCr Alloy On Formability of MoNiCr Alloy

Faceted Search & Find service v1.16.118 as of Jun 21 2024

Alternative Linked Data Documents: ODE Content Formats:

RDF

ODATA

Microdata

About

OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 112 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software