About: Short fatigue crack growth in an aircraft Al-alloy of a 7075 type after shot peening     Goto   Sponge   NotDistinct   Permalink

An Entity of Type : http://linked.opendata.cz/ontology/domain/vavai/Vysledek, within Data Space : linked.opendata.cz associated with source document(s)

AttributesValues
rdf:type
rdfs:seeAlso
Description
  • An effect of shot peening with two groups of parameters representing limits for practical use in service on growth of physically short fatigue cracks in a 2.4. mm thick sheet of an aircraft V-95 Al-alloy (a type of a 7075 alloy), clad with a 7072 Al-alloy (Al-Zn1) was investigated. Using the improved experimental methodology, physically short fatigue cracks of the length from 0.2. mm to more than 3. mm, most of them between 0.8 and 1.5. mm, were prepared under high cycle fatigue repeated tensile loading of the constant nominal stress range 160. MPa, load asymmetry R. =. 0. Specimens with existing short fatigue cracks together with some specimens with no cracks were then shot peened using two different groups of parameters. Microhardness measurement and informative measurement of residual stresses near the peened edges were carried out. Development of crack growth after shot peening were measured and compared with crack growth in specimens without shot peening. Retardation of crack growth was significant particularly for cracks shorter than 2. mm. For the specific stress range, evaluated results enabled to estimate threshold length of defects, which will be reliably arrested after the application of the shot peening.
  • An effect of shot peening with two groups of parameters representing limits for practical use in service on growth of physically short fatigue cracks in a 2.4. mm thick sheet of an aircraft V-95 Al-alloy (a type of a 7075 alloy), clad with a 7072 Al-alloy (Al-Zn1) was investigated. Using the improved experimental methodology, physically short fatigue cracks of the length from 0.2. mm to more than 3. mm, most of them between 0.8 and 1.5. mm, were prepared under high cycle fatigue repeated tensile loading of the constant nominal stress range 160. MPa, load asymmetry R. =. 0. Specimens with existing short fatigue cracks together with some specimens with no cracks were then shot peened using two different groups of parameters. Microhardness measurement and informative measurement of residual stresses near the peened edges were carried out. Development of crack growth after shot peening were measured and compared with crack growth in specimens without shot peening. Retardation of crack growth was significant particularly for cracks shorter than 2. mm. For the specific stress range, evaluated results enabled to estimate threshold length of defects, which will be reliably arrested after the application of the shot peening. (en)
Title
  • Short fatigue crack growth in an aircraft Al-alloy of a 7075 type after shot peening
  • Short fatigue crack growth in an aircraft Al-alloy of a 7075 type after shot peening (en)
skos:prefLabel
  • Short fatigue crack growth in an aircraft Al-alloy of a 7075 type after shot peening
  • Short fatigue crack growth in an aircraft Al-alloy of a 7075 type after shot peening (en)
skos:notation
  • RIV/25797000:_____/14:#0000473!RIV15-MSM-25797000
http://linked.open...avai/riv/aktivita
http://linked.open...avai/riv/aktivity
  • Z(MSM2579700001)
http://linked.open...iv/cisloPeriodika
  • březen 2014
http://linked.open...vai/riv/dodaniDat
http://linked.open...aciTvurceVysledku
http://linked.open.../riv/druhVysledku
http://linked.open...iv/duvernostUdaju
http://linked.open...titaPredkladatele
http://linked.open...dnocenehoVysledku
  • 44744
http://linked.open...ai/riv/idVysledku
  • RIV/25797000:_____/14:#0000473
http://linked.open...riv/jazykVysledku
http://linked.open.../riv/klicovaSlova
  • Aircraft 7075 Al-alloy; Fatigue crack growth; Residual stresses; Shot peening (en)
http://linked.open.../riv/klicoveSlovo
http://linked.open...odStatuVydavatele
  • NL - Nizozemsko
http://linked.open...ontrolniKodProRIV
  • [8B9B9BE889CC]
http://linked.open...i/riv/nazevZdroje
  • Surface and Coatings Technology
http://linked.open...in/vavai/riv/obor
http://linked.open...ichTvurcuVysledku
http://linked.open...cetTvurcuVysledku
http://linked.open...UplatneniVysledku
http://linked.open...v/svazekPeriodika
  • 243
http://linked.open...iv/tvurceVysledku
  • Mikulová, Dagmar
  • Černý, Ivo
  • Sís, Jiří
http://linked.open...n/vavai/riv/zamer
issn
  • 0257-8972
number of pages
http://bibframe.org/vocab/doi
  • 10.1016/j.surfcoat.2012.06.008
Faceted Search & Find service v1.16.118 as of Jun 21 2024


Alternative Linked Data Documents: ODE     Content Formats:   [cxml] [csv]     RDF   [text] [turtle] [ld+json] [rdf+json] [rdf+xml]     ODATA   [atom+xml] [odata+json]     Microdata   [microdata+json] [html]    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 07.20.3240 as of Jun 21 2024, on Linux (x86_64-pc-linux-gnu), Single-Server Edition (126 GB total memory, 85 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software