Attributes | Values |
---|
rdf:type
| |
Description
| - The present technical and technological potential of the modern continuous light mill enable with utilization of ASC-type finishing line (Automatic System Control) and continuous cooling of the rolled stock in the water boxes the thermomechanical (controlled) rolling of round bars of type SBQ (Special Bar Quality) together. During the thermomechanical forming (at different temperatures or cooling rates etc.) you can analyze the quality parameters of the steel bars of round profile. For better understanding of the dependance of forming conditions problems (such as the temperature, strain and strain rate) combined with the possibility of cooling (together with the rate and time) experiment of continuous and discontinuous testing on the plastometer Gleeble was suggested. After its implementation the attention was focused on the mathematical interpretation of the stress-strain characteristics of the steel and following on the metallographical analyze of microstructural changes. The results that were achie (en)
- Moderní kontijemné válcovací tratě umožňují s využitím hotovního bloku ASC (Automatic System Control) a průběžného chlazení provalků ve vodních boxech termomechanické (řízené) válcování kruhových tyčí typu SBQ (Special Bar Quality). V průběhu termomechanického tváření (při různých teplotách, rychlostech ochlazování, atd.) je možná analýza základních jakostních parametrů tyčové oceli kruhového průřezu. Pro lepší pochopení celé problematiky závislosti tvářecích podmínek (tj. teploty, deformace, deformační rychlosti) a v kombinaci s možností ochlazování (tedy i rychlosti a času), byl navržen experiment spojitých a přerušovaných zkoušek na plastometru GLEEBLE. Po jeho provedení byla pozornost zaměřena na matematické vyhodnocení napěťovo - deformačních charakteristik oceli a následně metalografickou analýzu mikrostrukturních změn. Dosažené výsledky jsou obecného charakteru a přispívají k teoretickému poznání řízeného tváření. (cs)
- Gegenwärtige technische und technologische Möglichkeiten des modernen kontifeinen Walzwerks ermöglichen das thermomechanische (gesteuerte) Walzen der Rundstänge vom Typs SBQ (Special Bar Quality) mit der Ausnutzung des Walzgerüstes ASC (Automatic System Control) und mit der laufenden Abkühlung der Walzstücke in den Wasserboxen. Es gibt die Möglichkeit, die Qualitätsparametern des Stabstahls mit dem Rundquerschnitt im Laufe der thermomechanischen Umformung (bei verschiedenen Temperaturen, Abkühlungsgeschwindigkeiten, etc.) zu betrachten. Für bessere Auffassung der ganzen Problematik der Abhängigkeit der Umformbedingungen (d.i. Temperatur, Verformung, Verformungsgeschwindigkeit) und in der Kombination mit der möglichen Abkühlung, wurde das plastometrische Experiment vorgeschlagen. Nach der Durchführung dieses Experiments erfolgte die eingehende computer-mathematische und die metallographische Analyse mit dem Hauptziel der Prozessoptimierung des thermomechanischen Walzens im kontifeinen Walzwerk. Die er
|
Title
| - Die Analyse der thermomechanischen Bearbeitung des mikrolegierten Stabstahls
- Analýza termomechanického zpracování mikrolegované oceli (cs)
- The Analysis of Thermomechanical Treatment of Microalloyed Steel Bar (en)
|
skos:prefLabel
| - Die Analyse der thermomechanischen Bearbeitung des mikrolegierten Stabstahls
- Analýza termomechanického zpracování mikrolegované oceli (cs)
- The Analysis of Thermomechanical Treatment of Microalloyed Steel Bar (en)
|
skos:notation
| - RIV/61989100:27360/07:00015294!RIV09-MSM-27360___
|
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| - P(FT-TA/003), P(GA106/04/0601), Z(MSM6198910015)
|
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/61989100:27360/07:00015294
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - kontifeines Walzwerk; finales Walzgerüst; thermomechanisches Walzen; Abkühlung; Spannung; Verformung; Verformungsgeschwindigkeit; Plastometer GLEEBLE; Simulation; metallographische Analyse (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...v/mistoKonaniAkce
| |
http://linked.open...i/riv/mistoVydani
| |
http://linked.open...i/riv/nazevZdroje
| - 14. Internationaler Studententag der Metallurgie
|
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...vavai/riv/projekt
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...iv/tvurceVysledku
| - Gajdzica, Tomáš
- Kliber, Jiří
- Kotas, Milan
- Aksenov, Sergey
|
http://linked.open...vavai/riv/typAkce
| |
http://linked.open.../riv/zahajeniAkce
| |
http://linked.open...n/vavai/riv/zamer
| |
number of pages
| |
http://purl.org/ne...btex#hasPublisher
| - Förderverein der Fachschaft Physic, Materialwissenschaften und Chemie, Clausthal-Zellerfeld
|
https://schema.org/isbn
| |
http://localhost/t...ganizacniJednotka
| |
is http://linked.open...avai/riv/vysledek
of | |