Attributes | Values |
---|
rdf:type
| |
Description
| - This article deals with the measurement and the setting up of the main mine ventilator in CSM mine – South by means of laser measurement. CSM Mine – South is located in the eastern basin of Karviná, in the mining district of Ostrava-Karviná near the village of Stonava. According to the Ordinance no. 22/1989 Coll., as subsequently amended, every mine has to have a separate ventilation system. Mechanical ventilation provides appropriate working conditions and prescribed composition of air in mines. Ventilation is carried out by the main mine ventilator (MMV) located at the main mine. For safety reasons, every mine has to be equipped with a backup MMV. Functionality of both the main and the backup mine ventilator has to be checked on a regular basis (generally by the manufacturer of the MMV). One of the most important parts of these inspections is the measurement of the geometry and the alignment of the gearing and the ventilator. These measurements are currently carried out by means of the latest laser equipment. Some of its most notable advantages are a very high accuracy, speed and a simple reproduction of the measured values. Measurement of the geometry of the MMV on the main CSM – South was held in October 2011. It was carried out by EasyLaser E710 measuring equipment. Both the first and the second check measurement resulted in values which complied with the maximum deviation of 4 mm required by the manufacturer of the MMV. The measured values were 1.23 mm in the horizontal direction (parallel offset) and - 0.56 mm in the vertical direction. In consideration of the measured values that met the required accuracy, the main mine ventilator on the mine CSM - South was recommended to be put into operation.
- This article deals with the measurement and the setting up of the main mine ventilator in CSM mine – South by means of laser measurement. CSM Mine – South is located in the eastern basin of Karviná, in the mining district of Ostrava-Karviná near the village of Stonava. According to the Ordinance no. 22/1989 Coll., as subsequently amended, every mine has to have a separate ventilation system. Mechanical ventilation provides appropriate working conditions and prescribed composition of air in mines. Ventilation is carried out by the main mine ventilator (MMV) located at the main mine. For safety reasons, every mine has to be equipped with a backup MMV. Functionality of both the main and the backup mine ventilator has to be checked on a regular basis (generally by the manufacturer of the MMV). One of the most important parts of these inspections is the measurement of the geometry and the alignment of the gearing and the ventilator. These measurements are currently carried out by means of the latest laser equipment. Some of its most notable advantages are a very high accuracy, speed and a simple reproduction of the measured values. Measurement of the geometry of the MMV on the main CSM – South was held in October 2011. It was carried out by EasyLaser E710 measuring equipment. Both the first and the second check measurement resulted in values which complied with the maximum deviation of 4 mm required by the manufacturer of the MMV. The measured values were 1.23 mm in the horizontal direction (parallel offset) and - 0.56 mm in the vertical direction. In consideration of the measured values that met the required accuracy, the main mine ventilator on the mine CSM - South was recommended to be put into operation. (en)
|
Title
| - MEASUREMENT OF GEOMETRY AND CHECKING OF ALIGNMENT OF THE MAIN MINE VENTILATOR DRIVE IN THE CSM – SOUTH MINE BY MEANS OF LASER MEASURMENT.
- MEASUREMENT OF GEOMETRY AND CHECKING OF ALIGNMENT OF THE MAIN MINE VENTILATOR DRIVE IN THE CSM – SOUTH MINE BY MEANS OF LASER MEASURMENT. (en)
|
skos:prefLabel
| - MEASUREMENT OF GEOMETRY AND CHECKING OF ALIGNMENT OF THE MAIN MINE VENTILATOR DRIVE IN THE CSM – SOUTH MINE BY MEANS OF LASER MEASURMENT.
- MEASUREMENT OF GEOMETRY AND CHECKING OF ALIGNMENT OF THE MAIN MINE VENTILATOR DRIVE IN THE CSM – SOUTH MINE BY MEANS OF LASER MEASURMENT. (en)
|
skos:notation
| - RIV/61989100:27350/12:86082286!RIV15-MSM-27350___
|
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/61989100:27350/12:86082286
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - CSM Mine – South, main mine ventilator, laser measurement, horizontal direction, vertical direction, parallel offset (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...v/mistoKonaniAkce
| |
http://linked.open...i/riv/mistoVydani
| |
http://linked.open...i/riv/nazevZdroje
| - 12th International Multidisciplinary Scientific GeoConference SGEM 2012 : conference proceedings. Volume I-V
|
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...iv/tvurceVysledku
| - Mikoláš, Milan
- Pospíšil, Jiří
- Dandoš, Rostislav
- Matas, Ondřej
- Subiková, Marie
|
http://linked.open...vavai/riv/typAkce
| |
http://linked.open...ain/vavai/riv/wos
| |
http://linked.open.../riv/zahajeniAkce
| |
issn
| |
number of pages
| |
http://bibframe.org/vocab/doi
| - 10.5593/sgem2012/s07.v2012
|
http://purl.org/ne...btex#hasPublisher
| |
http://localhost/t...ganizacniJednotka
| |