Attributes | Values |
---|
rdf:type
| |
Description
| - The article reports on mechanical and tribological properties of Mo-O-N coatings prepared by reactive magnetron sputtering using a continuous and pulsed inlet of oxygen and nitrogen. Main attention was devoted to a detailed investigation of correlations between the coating structure and its mechanical and tribological properties. It was found that (1) coefficient of friction (CoF) of the Mo-O-N coating correlates quite well with their hardness and effective Young's modulus and depends on its structure, (2) wear rate of the Mo-O-N coatings is almost independent on the value of effective Young's modulus and its value is very low of about ~0.15x10?(exp-6) mm(exp3)/Nm, (3) the incorporation of oxygen in the Mo-N coating increases its CoF at room temperature (RT), and (4) the CoF of both Mo-N and Mo-O-N coatings at first increases with increasing temperature and above ~ 350 °C decreases to the value of CoF of the as-deposited coating (CoF ? 0.4 and 0.5 for the Mo-N and Mo-O-N coatings, respectively).
- The article reports on mechanical and tribological properties of Mo-O-N coatings prepared by reactive magnetron sputtering using a continuous and pulsed inlet of oxygen and nitrogen. Main attention was devoted to a detailed investigation of correlations between the coating structure and its mechanical and tribological properties. It was found that (1) coefficient of friction (CoF) of the Mo-O-N coating correlates quite well with their hardness and effective Young's modulus and depends on its structure, (2) wear rate of the Mo-O-N coatings is almost independent on the value of effective Young's modulus and its value is very low of about ~0.15x10?(exp-6) mm(exp3)/Nm, (3) the incorporation of oxygen in the Mo-N coating increases its CoF at room temperature (RT), and (4) the CoF of both Mo-N and Mo-O-N coatings at first increases with increasing temperature and above ~ 350 °C decreases to the value of CoF of the as-deposited coating (CoF ? 0.4 and 0.5 for the Mo-N and Mo-O-N coatings, respectively). (en)
|
Title
| - Mechanical and tribological properties of sputtered Mo-O-N coatings
- Mechanical and tribological properties of sputtered Mo-O-N coatings (en)
|
skos:prefLabel
| - Mechanical and tribological properties of sputtered Mo-O-N coatings
- Mechanical and tribological properties of sputtered Mo-O-N coatings (en)
|
skos:notation
| - RIV/49777513:23640/13:43917964!RIV14-MSM-23640___
|
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| - P(GAP108/12/0393), Z(MSM4977751302)
|
http://linked.open...iv/cisloPeriodika
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/49777513:23640/13:43917964
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - magnetron sputtering; wear; friction; mechanical properties; structure; Mo-O-N coatings (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...odStatuVydavatele
| - US - Spojené státy americké
|
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...i/riv/nazevZdroje
| - Surface & Coatings Technology
|
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...vavai/riv/projekt
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...v/svazekPeriodika
| |
http://linked.open...iv/tvurceVysledku
| - Musil, Jindřich
- Novák, Petr
- Hromádka, Martin
- Čerstvý, Radomír
- Savková, Jarmila
- Soukup, Zbyněk
|
http://linked.open...ain/vavai/riv/wos
| |
http://linked.open...n/vavai/riv/zamer
| |
issn
| |
number of pages
| |
http://bibframe.org/vocab/doi
| - 10.1016/j.surfcoat.2012.06.090
|
http://localhost/t...ganizacniJednotka
| |