Attributes | Values |
---|
rdf:type
| |
rdfs:seeAlso
| |
Description
| - The paper deals with the mechanism of eutectic formation in a nickel coated aluminium system after heat treatment. The initial coating was produced from a nickel powder by means of high velocity oxyfuel (HVOF) spraying onto an aluminium sheet substrate. Specimens for investigations were manufactured immediately after the spraying. The specimens were heat-treated using a differential thermal analysis (DTA) apparatus up to the temperature of 700 or 900 °C and then cooled down to room temperature in argon atmosphere with a constant heating and cooling rate of 5 °C / min, under which Al-Al3Ni + Al3Ni hypereutectic alloys were formed within the initial substrate. Two different alloy microstructures consisting of intermetallic layers and coarse eutectic or an ultrafine well-dispersed eutectic were formed. Formation processes and resulting microstructures were studied by means of DTA, metallography, scanning electron microscopy, focused ion beam, energy dispersive microanalysis and image analysis technique
- The paper deals with the mechanism of eutectic formation in a nickel coated aluminium system after heat treatment. The initial coating was produced from a nickel powder by means of high velocity oxyfuel (HVOF) spraying onto an aluminium sheet substrate. Specimens for investigations were manufactured immediately after the spraying. The specimens were heat-treated using a differential thermal analysis (DTA) apparatus up to the temperature of 700 or 900 °C and then cooled down to room temperature in argon atmosphere with a constant heating and cooling rate of 5 °C / min, under which Al-Al3Ni + Al3Ni hypereutectic alloys were formed within the initial substrate. Two different alloy microstructures consisting of intermetallic layers and coarse eutectic or an ultrafine well-dispersed eutectic were formed. Formation processes and resulting microstructures were studied by means of DTA, metallography, scanning electron microscopy, focused ion beam, energy dispersive microanalysis and image analysis technique (en)
|
Title
| - Effect of Heat Treatment on Formation of Al-Al3Ni Hypereutectic Alloy
- Effect of Heat Treatment on Formation of Al-Al3Ni Hypereutectic Alloy (en)
|
skos:prefLabel
| - Effect of Heat Treatment on Formation of Al-Al3Ni Hypereutectic Alloy
- Effect of Heat Treatment on Formation of Al-Al3Ni Hypereutectic Alloy (en)
|
skos:notation
| - RIV/00216305:26620/14:PU111843!RIV15-MSM-26620___
|
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| - P(ED1.1.00/02.0068), P(GPP107/12/P739)
|
http://linked.open...iv/cisloPeriodika
| |
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/00216305:26620/14:PU111843
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - aluminium, aluminides, thermal spraying, differential thermal analysis, microscopy (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...odStatuVydavatele
| - CH - Švýcarská konfederace
|
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...i/riv/nazevZdroje
| - Key Engineering Materials (print)
|
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...vavai/riv/projekt
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...v/svazekPeriodika
| |
http://linked.open...iv/tvurceVysledku
| - Klakurková, Lenka
- Slámečka, Karel
- Smetana, Bedřich
- Čelko, Ladislav
- Švejcar, Jiří
- Žaludová, Monika
|
issn
| |
number of pages
| |
http://bibframe.org/vocab/doi
| - 10.4028/www.scientific.net/KEM.592-593.453
|
http://localhost/t...ganizacniJednotka
| |