Attributes | Values |
---|
rdf:type
| |
Description
| - Tento článek popisuje real-time implementaci řídicího algoritmu ze simulačního prostředí do programovatelného automatu (PLC). Při vývoji řídicího algoritmu by měl být reálný systém spojený se simulačním prostředím pomocí PLC aby bylo možné řídicí algoritmus otestovat přímo na reálném systému. V tomto případě slouží PLC pouze jako vstupně-výstupní zařízení a všechny výpočty probíhají pouze v simulačním prostředí - MATLAB/Simulinku. K tomuto spojení slouží process visualization interface, které komunikuje pomocí různých komunikačních protokolů: Ethernet, RS232, CAN or ProfiBus. All implementation steps are shown on one of advanced control algorithms - the Generalized Predictive Control. (cs)
- This paper shows real-time implementation of control algorithms from a simulation environment into the Programmable Logic Controller (PLC). Development of control algorithms is necessary for their use in a simulation environment and verification on simulation models. The real control system should be connected to the simulation environment with a PLC to test the control algorithms on a real physical model. In this case the PLC is used only as an IO device and all computations are performed in the simulation environment - MATLAB/Simulink. This connection is ensured via a general process visualization interface, which can transmit a data via different communication protocols: Ethernet, RS232, CAN or ProfiBus. Finally, the control algorithm should be implemented into the PLC and MATLAB/Simulink can be used for monitoring of the process input, output or others parameters. All implementation steps are shown on one of advanced control algorithms - the Generalized Predictive Control.
- This paper shows real-time implementation of control algorithms from a simulation environment into the Programmable Logic Controller (PLC). Development of control algorithms is necessary for their use in a simulation environment and verification on simulation models. The real control system should be connected to the simulation environment with a PLC to test the control algorithms on a real physical model. In this case the PLC is used only as an IO device and all computations are performed in the simulation environment - MATLAB/Simulink. This connection is ensured via a general process visualization interface, which can transmit a data via different communication protocols: Ethernet, RS232, CAN or ProfiBus. Finally, the control algorithm should be implemented into the PLC and MATLAB/Simulink can be used for monitoring of the process input, output or others parameters. All implementation steps are shown on one of advanced control algorithms - the Generalized Predictive Control. (en)
|
Title
| - Real-Time Communication between MATLAB/Simulink and PLC via Process Visualization Interface
- Real-Time Communication between MATLAB/Simulink and PLC via Process Visualization Interface (en)
- Real-Time komunikace mezi MATLAB/Simulinkem a PLC pomocí Process Visualization Interface (cs)
|
skos:prefLabel
| - Real-Time Communication between MATLAB/Simulink and PLC via Process Visualization Interface
- Real-Time Communication between MATLAB/Simulink and PLC via Process Visualization Interface (en)
- Real-Time komunikace mezi MATLAB/Simulinkem a PLC pomocí Process Visualization Interface (cs)
|
skos:notation
| - RIV/00216305:26220/07:PU68367!RIV08-GA0-26220___
|
http://linked.open.../vavai/riv/strany
| |
http://linked.open...avai/riv/aktivita
| |
http://linked.open...avai/riv/aktivity
| - P(GA102/06/1132), Z(MSM0021630529)
|
http://linked.open...vai/riv/dodaniDat
| |
http://linked.open...aciTvurceVysledku
| |
http://linked.open.../riv/druhVysledku
| |
http://linked.open...iv/duvernostUdaju
| |
http://linked.open...titaPredkladatele
| |
http://linked.open...dnocenehoVysledku
| |
http://linked.open...ai/riv/idVysledku
| - RIV/00216305:26220/07:PU68367
|
http://linked.open...riv/jazykVysledku
| |
http://linked.open.../riv/klicovaSlova
| - PLC, Real-Time, MATLAB, Simulink, Predictive Control (en)
|
http://linked.open.../riv/klicoveSlovo
| |
http://linked.open...ontrolniKodProRIV
| |
http://linked.open...v/mistoKonaniAkce
| |
http://linked.open...i/riv/mistoVydani
| |
http://linked.open...i/riv/nazevZdroje
| - VOLUME 2 of the Proceedings of the 11th WSEAS International Multiconference CSCC
|
http://linked.open...in/vavai/riv/obor
| |
http://linked.open...ichTvurcuVysledku
| |
http://linked.open...cetTvurcuVysledku
| |
http://linked.open...vavai/riv/projekt
| |
http://linked.open...UplatneniVysledku
| |
http://linked.open...iv/tvurceVysledku
| - Pivoňka, Petr
- Mikšánek, Vojtěch
|
http://linked.open...vavai/riv/typAkce
| |
http://linked.open.../riv/zahajeniAkce
| |
http://linked.open...n/vavai/riv/zamer
| |
number of pages
| |
http://purl.org/ne...btex#hasPublisher
| |
https://schema.org/isbn
| |
http://localhost/t...ganizacniJednotka
| |